What are the key features of the ECM-SKLH 3.5-inch SBC?

The Avalue ECM-SKLH features 6th Gen Intel® Core™ i7/i5/i3 BGA processors, 1x DDR4 2133MHz SO-DIMM socket supporting up to 16GB, triple display support, dual Gigabit LAN ports, expansion options, multiple USB ports, 2 COM ports, and operates with +12V DC input.

What processor options are available for the ECM-SKLH?

The ECM-SKLH offers high-performance 6th Gen Intel processor options: Intel® Core™ i7-6820EQ (4-core, 2.8GHz), Intel® Core™ i5-6440EQ (4-core, 2.7GHz), and Intel® Core™ i3-6100E (2-core, 2.7GHz). These options provide significant processing power for demanding industrial applications.

What display capabilities does the ECM-SKLH offer?

The ECM-SKLH supports triple display outputs through two HDMI ports (up to 4096x2160@24Hz each) and one LVDS interface (up to 1920x1080@60Hz). It features Intel® 7th Gen SoC Integrated Graphics.

What expansion options are available on the ECM-SKLH?

The ECM-SKLH offers expansion through one Mini PCIe slot supporting mSATA and one M.2 Key-B 2242 slot. It also includes two SATA III interfaces for storage expansion.

How does the ECM-SKLH compare to the newer ECM-KBLH model?

The ECM-SKLH uses 6th Gen Skylake processors while the KBLH uses 7th Gen Kaby Lake processors. The 7th Gen processors offer incremental performance improvements, better power efficiency, and enhanced media processing capabilities. Otherwise, both models feature similar I/O options, expansion capabilities, and overall design.

Avalue · Placa base industrial y embebida

ECM-SKLH

Ficha técnica

*Precio bajo consulta. Contáctenos para obtener un presupuesto.

Fabricante: Avalue

Aspectos destacados

Onboard 6th Gen Intel® Core ™ i7/i5/i3 BGA Processor
One 260-pin DDR4 SO-DIMM Socket, Supports Up to 16GB DDR4 2133 SDRAM (Only Support Non-ECC)
Dual-channel 18/24-bit LVDS, HDMI
Triple Display (LVDS, 2x HDMI)
2 SATA III, 1 Mini PCIe, 4 USB 3.0,1 M.2 (2242) B-Key, 2 USB 2.0, 2 COM, 8-bit GPIO

Descripción del producto

The Avalue ECM-SKLH is a 3.5-inch Single Board Computer designed for industrial and embedded applications. It integrates 6th Gen Intel® Core™ i7/i5/i3 BGA processors, supporting up to 16GB DDR4 2133MHz SO-DIMM memory.

Key features include triple display outputs (2 x HDMI, 1 x LVDS), dual Gigabit LAN ports (Intel® I210AT and I219LM), multiple USB ports (4 x USB 3.0, 2 x USB 2.0), serial interfaces (1 x RS-232/422/485, 1 x RS-232), GPIOs, and expansion options through Mini PCIe and M.2 (2242) B-Key slots.

With a compact form factor of 146mm x 101mm, 12V DC input, and support for Windows and Linux operating systems, the ECM-SKLH offers a robust solution for space-constrained environments.

Especificaciones técnicas

Procesador

6th Gen. Intel® Core™ i7-6820EQ 4-Core 2.8GHz Processor

6th Gen. Intel® Core™ i5-6440EQ 4-Core 2.7GHz Processor

6th Gen. Intel® Core™ i3-6100E 2-Core 2.7GHz Processor

Platform Controller Hub

Intel® QM170 Chipset

Memoria del sistema

1 x 260-Pin DDR4 2133MHz SO-DIMM Up to 16GB Max.

Chipset de E/S

EC iTE IT8528E

Temporizador watchdog

H/W Reset: 1Sec. ~ 65535Sec./Min. and1 Sec. or 1Min./Step

BIOS

AMI BIOS, 128Mbit SPI Flash ROM

Monitor de estado del hardware

Monitoring System Temperature and Voltage with Auto Throttling Control

Placa

3.5"

Almacenamiento

1 x mSATA supported from Mini PCIe

1 x M.2 Key B supports SATA or PCIe x1/USB

Pantallas múltiples

Triple Display

Chipset gráfico

Intel® 7th Gen SoC Integrated Graphics

Espec. y resolución

HDMI: Max. resolution 4096 x 2160@24Hz

LVDS: Max. resolution 1920 x 1080@60Hz

Dual-channel 18/ 24-bit LVDS

LVDS

1 x LVDS: 1920 x 1080 Dual channel 18/24-bits LVDS

Expansión

1 x Mini PCIe supports mSATA

1 x M.2 Key B 2242

Códec de audio

Realtek ALC888S HD Audio Decoding Controller

Interfaz de audio

Line-in, Mic-in, Line-out

Amplificador de audio

2W Amplifier

Chipset LAN

1 x Intel® I210AT

1 x Intel® I219LM

Interfaz Ethernet

10/100/1000 Base-Tx GbE compatible

Puerto LAN

2 x RJ-45

Modo de alimentación

AT/ATX (Default Setting: AT)

SO

Windows 7, Windows 10, Linux

Información de certificación

CE, FCC, RoHS Compliant

USB

4 x USB 3.0

2 x USB 2.0

Puerto COM

1 x RS-232

1 x RS-232/422/485

SATA

2 x SATA III

DIO

1 x 8-bit GPIO

MIO

1 x LPC

1 x SPI

Temp. de funcionamiento

0°C ~ 60°C (32°F ~ 140°F)

Temp. de almacenamiento

-40°C ~ 75°C (-40°F ~ 167°F)

Dimensiones (L x An)

5.7" x 4." (146mm x 101mm)

Peso

0.44lb (0.2kg)

Humedad en funcionamiento

40°C @ 95% Relative Humidity, Non-condensing

Requisitos de alimentación

DC in +12V

Información de pedido

ECM-SKLH-6820-A1R

3.5W/i7 6820EQ/2SATAIII/2COM/A1

¿Qué es ECM-SKLH?

The ECM-SKLH is a placa base industrial y embebida manufactured by Avalue, designed specifically for 3.5inch-sbc applications. It features red of 1 x Intel® I210AT, 1 x Intel® I219LM and so of AMI BIOS, 128Mbit SPI Flash ROM. The Avalue ECM-SKLH is a 3.5-inch Single Board Computer designed for industrial and embedded applications. It integrates 6th Gen Intel® Core™ i7/i5/i3 BGA processors, supporting up to 16GB DDR4 2133MHz SO-DIMM memory. Key features include triple display outputs (2 x HDMI, 1 x LVDS), dual Gigabit LAN ports (Intel® I210AT and I219LM), multiple USB ports (4 x USB 3.0, 2 x USB 2.0), serial interfaces (1 x RS-232/422/485, 1 x RS-232), GPIOs, and expansion options through Mini PCIe and M.2 (2242) B-Key slots. With a compact form factor of 146mm x 101mm, 12V DC input, and support for Windows and Linux operating systems, the ECM-SKLH offers a robust solution for space-constrained environments.

Características y ventajas principales

Onboard 6th Gen Intel® Core ™ i7/i5/i3 BGA Processor
One 260-pin DDR4 SO-DIMM Socket, Supports Up to 16GB DDR4 2133 SDRAM (Only Support Non-ECC)
Dual-channel 18/24-bit LVDS, HDMI
Triple Display (LVDS, 2x HDMI)
2 SATA III, 1 Mini PCIe, 4 USB 3.0,1 M.2 (2242) B-Key, 2 USB 2.0, 2 COM, 8-bit GPIO

Aplicaciones y casos de uso

El ECM-SKLH es ideal para numerosas aplicaciones de automatización industrial:

High-performance computing and data processing tasks
Peripheral device connectivity and data transfer
Memory-intensive applications and multitasking
Visual monitoring and data display systems
Custom industrial computing solutions
Industrial and embedded applications
Industrial automation platforms
Embedded system development

Preguntas frecuentes

3.5-inch SBCs (Single Board Computers) are compact embedded computers measuring approximately 146mm x 101mm (5.75" x 4"). Their versatile form factor makes them ideal for applications requiring a balance of performance, I/O options, and size constraints, including industrial automation, IoT gateways, edge computing, digital signage, medical devices, transportation systems, robotics, and industrial control systems.

3.5-inch SBCs offer several advantages: a balanced form factor between size and functionality; rich I/O options without requiring expansion cards; better thermal management than smaller boards; good performance-to-size ratio; flexibility with both soldered and socketed CPU options; simplified integration into mid-sized enclosures; good scalability for industrial applications; and long lifecycle support typical of industrial-grade components.

Different Intel processor generations provide varied capabilities: newer generations offer enhanced multi-core performance, AI acceleration, and support for faster memory; mid-range options balance performance and power efficiency for IoT and edge applications; while entry-level processors optimize for low power consumption and extended temperature ranges. The choice involves balancing processing requirements, power constraints, thermal considerations, and specific features needed for the target application.

Key factors include: processing requirements for your workload; memory and storage configurations; specific I/O interface requirements; networking needs; temperature operating range; power constraints; expansion capabilities; long-term availability guarantees; operating system support; ruggedness including shock and vibration resistance; certifications required for your industry; and total cost of ownership including maintenance and support.

Effective cooling strategies include: ensuring adequate airflow (at least 0.5 m/s); using conduction cooling with thermal pads connecting to the enclosure; implementing passive cooling solutions like aluminum enclosures with external fins; maintaining adequate clearance around heat-generating components; arranging components to create a natural convection path; implementing thermal monitoring; and for extreme environments, using specialized cooling techniques like heat pipes or forced air cooling.

Important power considerations include: providing stable DC input within the specified voltage range with proper regulation; understanding AT versus ATX power modes; implementing proper power sequencing; adding surge protection for industrial environments; implementing power filtering to eliminate electrical noise; calculating total power budget including peripherals; planning for power management; using high-quality power connectors; and potentially implementing backup power solutions for critical applications.

Expansion options include: utilizing M.2 or Mini PCIe slots for adding connectivity or storage; leveraging multiple display outputs; using USB expansion for additional peripherals; implementing I2C, SPI, or GPIO-based sensor networks; utilizing multiple Ethernet ports for network segregation; developing custom carrier boards; implementing software-based capabilities through virtualization; and considering network-based resources for functions that cannot be implemented locally.

Common bottlenecks include: thermal limitations (addressed through proper cooling); memory bandwidth constraints (mitigated by using faster memory); storage I/O (improved by using NVMe over PCIe); network congestion (overcome by using optimized networking); USB bus saturation (resolved by distributing devices across controllers); processor limitations in multi-threaded workloads (addressed through workload optimization); and display performance with multiple screens (managed by understanding bandwidth limitations).

Recommended mounting practices include: using the four corner mounting holes with appropriate standoffs; maintaining minimum clearances; ensuring proper thermal contact if using conduction cooling; considering orientation effects on cooling; using vibration-resistant fasteners for applications with vibration; implementing strain relief for cables; avoiding mounting near EMI sources; ensuring accessibility for maintenance; and verifying that the enclosure's thermal design is compatible with the board's cooling requirements.

Best handling practices include: using proper ESD protection; holding the board by its edges; avoiding flexing the PCB; ensuring power is off when connecting components; using appropriate torque for mounting screws; applying thermal compounds correctly; connecting cables with proper orientation; ensuring expansion cards and memory modules are properly seated; avoiding exposure to moisture or contaminants; and following proper packaging procedures for transportation.

Best practices include: using high-quality, shielded cables; implementing strain relief; connecting power supplies before signal cables; using locking connectors where available; avoiding exceeding maximum cable lengths; balancing loads across multiple ports; verifying peripheral power requirements; properly configuring serial port parameters before connecting devices; testing peripherals individually; and labeling all connections for maintenance.

Proper OS setup involves: obtaining manufacturer-recommended OS images; configuring BIOS/UEFI settings appropriately; optimizing partition layouts; installing essential drivers; disabling unnecessary services; configuring appropriate power management settings; implementing a backup strategy; establishing a procedure for OS updates that includes proper testing; and documenting the entire configuration process.

Troubleshooting steps include: verifying power supply voltage and current capability; checking for reverse polarity connection; examining power cables; inspecting for physical damage; testing with a known-good power supply; verifying the correct power mode configuration; checking power switches or jumpers; measuring voltage at test points; inspecting for short circuits; and checking status LEDs for error codes.

Diagnostic steps include: checking cable connections; verifying monitor power and input selection; confirming resolution compatibility; trying alternative display interfaces; updating display drivers; resetting BIOS display settings; testing with a known-working display; checking BIOS settings for primary display selection; verifying multi-display configuration; inspecting system logs; and potentially reinstalling graphics drivers or updating the BIOS.

Common causes include: physical connection problems; driver issues; incorrect IP configuration; firewall or security software blocking communication; conflicting IP addresses; switch or router configuration issues; hardware failure; incorrect gateway or DNS settings; disabled protocols; packet filtering rules; VLAN mismatches; and network congestion. Troubleshooting should include link status verification, ping tests, checking logs, and testing with alternative equipment.

Troubleshooting steps include: verifying proper insertion and securing; checking compatibility with the slot type; confirming BIOS recognition; verifying controller settings; updating BIOS; checking for required drivers; testing in another system if possible; verifying power management settings; checking thermal conditions; and for storage devices, running diagnostic tools to verify device health.

Aspectos destacados

Descripción del producto

Especificaciones técnicas

Información del sistema

Procesador

Platform Controller Hub

Memoria del sistema

Chipset de E/S

Temporizador watchdog

BIOS

Monitor de estado del hardware

Placa

Almacenamiento

Almacenamiento

Pantalla

Pantallas múltiples

Chipset gráfico

Espec. y resolución

LVDS

Expansión

Expansión

Audio

Códec de audio

Interfaz de audio

Amplificador de audio

Ethernet

Chipset LAN

Interfaz Ethernet

Puerto LAN

Requisitos de alimentación

Modo de alimentación

Soporte de software

SO

Certificación

Información de certificación

E/S

USB

Puerto COM

SATA

DIO

MIO

Mecánica y condiciones ambientales

Temp. de funcionamiento

Temp. de almacenamiento

Dimensiones (L x An)

Peso

Humedad en funcionamiento

Requisitos de alimentación

Información de pedido

Información de pedido

¿Qué es ECM-SKLH?

Características y ventajas principales

Aplicaciones y casos de uso

Preguntas frecuentes