What are the key features of the EPM-1722 embedded peripheral?

The EPM-1722 offers high-speed data acquisition, multiple I/O interfaces, industrial-grade reliability, and compact design for embedded applications.

What applications is the EPM-1722 suitable for?

It is ideal for industrial automation, machine control, and data logging systems requiring robust and flexible I/O expansion.

What are embedded peripherals and what are their typical applications?

Embedded peripherals are modular I/O and interface boards designed to expand the capabilities of embedded and industrial systems. They are used in automation, data acquisition, process control, and machine monitoring.

What are the advantages of using embedded peripherals?

They provide flexible I/O expansion, industrial-grade reliability, and easy integration with a wide range of embedded platforms.

What is the typical power input for embedded peripherals?

Most embedded peripherals support wide voltage input ranges (e.g., 9-36V DC) and are designed for low power consumption.

What communication interfaces are supported by embedded peripherals?

Common interfaces include RS-232/422/485, USB, Ethernet, CAN, and GPIO, depending on the model.

Are embedded peripherals compatible with standard industrial protocols?

Many models support protocols such as Modbus, CANopen, and EtherCAT for seamless integration.

What is the operating temperature range for embedded peripherals?

Most models support industrial temperature ranges, typically -40°C to +85°C.

How do I install an embedded peripheral in my system?

Most peripherals support DIN-rail, panel, or board-level mounting. Refer to the product manual for detailed installation steps.

What drivers or software are required for embedded peripherals?

Drivers and SDKs are usually provided for Windows and Linux platforms. Check the product page for downloads and documentation.

How do I connect embedded peripherals to my host system?

Use the appropriate interface cable (USB, serial, Ethernet, etc.) and ensure correct configuration in your system BIOS or OS.

What should I do if my embedded peripheral is not detected?

Check power supply, cable connections, and ensure drivers are properly installed. Try connecting to a different port or system if possible.

How can I update the firmware on my embedded peripheral?

Refer to the product manual for firmware update instructions. Updates are typically performed via USB or serial interface using vendor tools.

What steps should I take if I experience communication errors?

Verify interface settings (baud rate, parity, etc.), check for cable or connector damage, and ensure proper grounding and EMC protection.

Avalue EPM-1722 DC-DC 60W voedingsmodule voor maritiem

Productbeschrijving

The Avalue EPM-1722 is a DC to DC 60W marine power module engineered for demanding maritime environments. It offers a wide input voltage range of +9 to 36VDC and provides a stable 12VDC output with a maximum current of 5A.

Designed with isolation and protection features, the EPM-1722 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. Certified with IEC 60945, it meets stringent marine standards for safety and performance.

This module is an excellent choice for marine embedded systems requiring dependable power solutions.

Technische specificaties

Connector voedingsingang

M12 connector

Uitgangsconnector voeding (DC-12V)

AT 2Px2 connector

Maximaal uitgangsvermogen

60W

Ingangsspanningsbereik

+9~ 36Vdc

Uitgangsspanningsbereik

12Vdc

Maximale uitgangsstroom (DC-12V)

5000mA

Werkspanning

24Vdc w/1.5V Isolation

IEC-bescherming

IEC 60945

Afmeting

148*43mm

Vormfactor

Customized

Trillingstest

5G @5~500Hz

Bedrijfstemp.

Wide temperature -40°C ~ 85°C.

Opslagtemp.

-40°C ~ +85°C

Schoktest

10G @ 11ms

Wat is EPM-1722?

The EPM-1722 is a industrieel en embedded moederbord manufactured by Avalue, designed specifically for motherboard-embedded-peripheral applications. The Avalue EPM-1722 is a DC to DC 60W marine power module engineered for demanding maritime environments. It offers a wide input voltage range of +9 to 36VDC and provides a stable 12VDC output with a maximum current of 5A. Designed with isolation and protection features, the EPM-1722 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. Certified with IEC 60945, it meets stringent marine standards for safety and performance. This module is an excellent choice for marine embedded systems requiring dependable power solutions.

Belangrijkste kenmerken en voordelen

Informatie over de kenmerken volgt binnenkort.

Toepassingen en gebruiksscenario's

De EPM-1722 is ideaal voor uiteenlopende industriële automatiseringstoepassingen:

Custom industrial computing solutions
Industrial automation platforms
Embedded system development
Control system integration

EPM-1722

Hoogtepunten