BMX-T528

Seria: BMX

ProducentAvalue

The Avalue BMX-T528 is a compact barebone system based on the EMX-TGLC-B1 board for 15W 11th Generation Intel Core i7-1165G7 / i5-1135G7 (Tiger Lake) processors. Dual DDR4 3200MHz SO-DIMM sockets support up to 64GB (non-ECC), with discrete TPM 2.0, RAID 0/1 (Core i SKUs), and a flexible M.2 expansion set including a Nano-SIM slot for WWAN+GNSS. The BMX-T528 is built for rugged, connected edge use: M.2 Type-B (PCIe/SATA/USB, NVMe-capable) and M.2 Key-E (Wi-Fi/CNVi), dual 2.5" drive bays, four antenna mounts, multiple RS-232/422/485 and RS-232 COM ports, USB 3.1 Gen2, dual LAN, LVDS plus 2 do 4 DisplayPort output, and dual power inputs (4-pin Mini-DIN and 2-pin terminal block), suited to transportation, machine control, and field gateway roles on Windows or Linux.

Najważniejsze cechy

11th Gen Intel Core i7-1165G7 / i5-1135G7 (15W, Tiger Lake)
EMX-TGLC-B1 board; dual DDR4 3200MHz SO-DIMM up to 64GB
Discrete TPM 2.0; RAID 0/1 (Core i SKUs)
M.2 Type-B (PCIe/SATA/USB, NVMe) w/ Nano-SIM (WWAN+GNSS)
M.2 Key-E 2230 (Wi-Fi / CNVi)
2 x 2.5" drive bays, 4 x antenna mounts
USB 3.1 Gen2 + USB 2.0; multi RS-232/422/485
Dual LAN; LVDS + 2 do 4 DisplayPort output
Dual power input (4-pin Mini-DIN + 2-pin terminal block)

Dane techniczne

Informacje o systemie

Procesor	Intel® Core™ i7-1165G7 Processor (15W), Intel® Core™ i5-1135G7 Processor (15W), *According to the EMX-TGLC-B1 standard BOM
Platform Controller Hub	Soc
Pamięć systemowa	Two 260-pin DDR4 3200 MHz SO-DIMM socket, supports up to 64GB Max (non ECC only)
SBC	EMX-TGLC-B1
Monitor stanu sprzętu	CPU temperature monitoring, Voltage monitoring, CPU fan speed control
Watchdog	H/W Reset, 1sec., 65535sec./min.1sec. or 1min. step
TPM	dTPM 2.0
Chipset I/O	NuvoTon_NCT6126D
Informacje o BIOS	AMI uEFI BIOS, 256Mbit SPI Flash ROM
RAID	RAID0/1 (only Core i)

Rozszerzenia

M.2

1-M.2 Type B 3042/3052/2242/2260/2280, Support PCI-e x1/ 1x SATA/1xUSB3.0/1xUSB2.0 with 1 x Nano SIM card slot with co-lay FPC connector, support WWAN+GNSS or NVMe (SATA) SSD, *SATA 2 share with M.2 key B SATA, *Only supports one SIM card, *Does not support I2S and PCM functions, *Only Support PCI-e x1 signal module, 1-M.2 Key E 2230 support WiFi module and CNVi (1 x PCI-e x1 & USB 2.0 Signal), *Does not support PCM/I2S and UART/SDIO functions, *Due to support Intel CNVI function, please do not use support UART or SDIO module to avoid misfunction.

Pamięć masowa

M.2	1-M.2 Type B 3042/3052/2242/2260/2280 NVMe SSD, SATA 2 share with M.2 key B SATA, Only Support PCI-e x1 signal module
Kieszeń na dysk	2-2.5” Drive Bay (9.5mm)

I/O z przodu

Gniazdo SIM	1 x Internal SIM slot
Port COM	4 x COM optional
Antena	4 x Antenna with dust cover
USB	4 x USB2.0 optional

I/O z tyłu

LVDS	1 x LVDS for DB26 Optional
Wejście AC/DC	1-4P Mini Din Jack (Edge), 1-2P Terminal Black (cable)
USB	4-USB 3.1 Gen2
Przycisk zasilania	1 x Push Button for Power on/off
HDMI	2 x DP or 4 x DP
Wskaźnik LED	1 x Power LED (Green), 1 x Storage LED (Red)
Port LAN	2 x RJ45
Port COM	2 x RS/232/RS422/485, 4 x RS-232

I/O z prawej strony

Antena	2 x Antenna with dust cover

I/O z lewej strony

Antena	2 x Antenna with dust cover

I/O na płycie

EC Debug	1 x 3 pin, pitch 2.00mm connector for EC SPI debug (JEC1)
Panel przedni	1 x 2 x 5 pin, pitch 2.54mm connector for front panel_1 (JFP1)
Wejście DC	1 x 4P Mini Din Jack, 1 x 2 x 2 pin, pitch 4.20mm connector for power input connector (PWR1)
BIOS EC	1 x 2 x 4 pin, pitch 2.00mm connector for BIOS SPI (JBIOS1)
Sygnał SATA	2 x 7 pin SATAIII Interface connector
eSPI	1 x 2 x 6 pin, pitch 2.00mm connector for eSPI debug (JESPI1)
Przycisk Clear CMOS	1 x 3 pin, pitch 2.00mm connector for CMOS clear (JRTC1)
Bateria RTC	1 x 2 Pin Pitch 1.25mm SMT type battery connector (CR2032 Battery) JBAT1
Przełącznik AT/ATX	1 x 1 x 3 pin pitch 2.54mm connector for AT/ATX jumper (JAT1)
Zasilanie SATA	2 x 4-Pin Wafer (2.0mm) for 5V/12V Power SATA Power,1A

Wyświetlacz

Chipset graficzny	Intel® Iris® Xe Graphics (i7-1165G7/ i5-1135G7), Intel® UHD Graphics for 11th Gen Intel® Processors (i3-1115G4)
Rozdzielczość	˙DP (DP1.4): Max: 7680 x 4320@60 Hz, Note: This resolution is actual test result. Intel resolution as below:, ˙2 x DP++: 1920 x 1080@60 Hz (with passive Displayport(DP) to HDMI Dongle/Adapter), ˙LVDS: 1920 x 1080 Dual channel 18/24-bits LVDS (Chrontel CH7513 eDP to LVDS), ˙eDP 4096 x 2304@60 Hz, *2 x DP++, LVDS
Wiele wyświetlaczy	Triple Display, Multiple Display: DP+DP+eDP or DP+DP+LVDS

Audio

Kodek audio	Realtek ALC897 co-lay ALC888S

Ethernet

Chipset LAN	1 x Intel® I226LM 2.5 Gigabit Ethernet (LAN2), 1 x Intel® I219LM Gigabit Ethernet PHY (LAN1), *according to the EMX-TGLC-B1 standard BOM
Przepływność na port	10/100/1000 Base-Tx GbE compatible & 2.5 Gigabit Ethernet

Wymagania dotyczące zasilania

ACPI	Single power ATX Support S0,S3, S4, S5, ACPI 5.0 Compliant
Tryb zasilania	AT/ATX (ATX is default setting)
Specyfikacja wejścia napięciowego	+24Vdc
Złącze wejścia napięcia	1-4P Mini Din Jack (Edge), 1-2P Terminal Black (cable)

Wsparcie programowe

OS	Win10, Win11, Linux

Parametry mechaniczne i środowiskowe

Temperatura pracy	0°C ~ 50°C (w/SSD) ambient w/ 0.5 air flow
Temp. przechowywania	-30~70C° (-22°F ~ 158°F)
Wilgotność pracy	40°C @ 95% Relative Humidity, Non-condensing
Wymiary (szer. x dł. x wys.)	180mm x 182mm x 82.2 mm (Standard)
Masa	Net weight:2.2KG, Gross weight: 3.4KG
Test wibracyjny	With SSD:5Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 30min/axis
Test udarowy	With SSD:50Grms, IEC 60068-2-27, Half Sine, 11ms
Test zrzutowy	ISTA 2A, IEC-60068-2-32 Test : Ed
Zestaw montażowy	Wall mount kit (optional), DIN RAIL (optional)

Lista zawartości opakowania

Pozycje	4 x 角垫Rubber foot E199RF00010R, 2 x L型固定支架（E195BMBMT52100R for Optional）, 1 x 120W adapter optional, 1 x Power cord (optional)

Informacje o zamawianiu

Informacje o zamawianiu	BMX-T528-3G4-B2C, BMX-T528-5G7-B2C, BMX-T528-7G7-B2C, C971XBMT528001R, C971XBMT528002R, C971XBMT528003R