What are the key features of the EPM-1715 embedded peripheral?

The EPM-1715 features multiple serial ports, isolated I/O, and DIN-rail mounting for easy integration in control panels.

What applications is the EPM-1715 suitable for?

It is suitable for serial device networking, industrial communication, and automation systems.

What are embedded peripherals and what are their typical applications?

Embedded peripherals are modular I/O and interface boards designed to expand the capabilities of embedded and industrial systems. They are used in automation, data acquisition, process control, and machine monitoring.

What are the advantages of using embedded peripherals?

They provide flexible I/O expansion, industrial-grade reliability, and easy integration with a wide range of embedded platforms.

What is the typical power input for embedded peripherals?

Most embedded peripherals support wide voltage input ranges (e.g., 9-36V DC) and are designed for low power consumption.

What communication interfaces are supported by embedded peripherals?

Common interfaces include RS-232/422/485, USB, Ethernet, CAN, and GPIO, depending on the model.

Are embedded peripherals compatible with standard industrial protocols?

Many models support protocols such as Modbus, CANopen, and EtherCAT for seamless integration.

What is the operating temperature range for embedded peripherals?

Most models support industrial temperature ranges, typically -40°C to +85°C.

How do I install an embedded peripheral in my system?

Most peripherals support DIN-rail, panel, or board-level mounting. Refer to the product manual for detailed installation steps.

What drivers or software are required for embedded peripherals?

Drivers and SDKs are usually provided for Windows and Linux platforms. Check the product page for downloads and documentation.

How do I connect embedded peripherals to my host system?

Use the appropriate interface cable (USB, serial, Ethernet, etc.) and ensure correct configuration in your system BIOS or OS.

What should I do if my embedded peripheral is not detected?

Check power supply, cable connections, and ensure drivers are properly installed. Try connecting to a different port or system if possible.

How can I update the firmware on my embedded peripheral?

Refer to the product manual for firmware update instructions. Updates are typically performed via USB or serial interface using vendor tools.

What steps should I take if I experience communication errors?

Verify interface settings (baud rate, parity, etc.), check for cable or connector damage, and ensure proper grounding and EMC protection.

Avalue EPM-1715 moduł zasilania DC/DC 60W

Opis produktu

The Avalue EPM-1715 is a DC to DC 60W power module engineered for industrial environments. It offers a wide input voltage range and provides a stable 12VDC output with a maximum current of 5A.

Designed with isolation and protection features, the EPM-1715 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. This module is an excellent choice for embedded systems requiring dependable power solutions.

Dane techniczne

Złącze zasilania wejściowego

DC Jack 3-pin 2.5mm on board

Złącze wyjścia zasilania (DC-12V)

AT 2Px2 Power connector with power cable, follows ATX 2*2 +12V power pin assignment

Typ zasilania

AT

Superkondensator

400F (-5% to +10% (20°C)

Znamionowa moc wyjściowa

60W total output

Maksymalna moc wyjściowa

80W total output

Zakres napięcia wejściowego

12V ~ 24V

Zakres napięcia wyjściowego

+12V ±5%

Zakres tętnień i szumów wyjściowych

+12V: 100mVpp

Żywotność ogniw superkondensatorowych

@2.5V 65°C is about 8000 hours, @2.5V 50°C is about 14000 hours

Maksymalny prąd wyjściowy (DC-12V)

6.7A

Temperatura pracy

0 ~ +60°C

Temp. przechowywania

-40 ~ +75°C

Wilgotność pracy

0 ~ 90% Relative Humidity, Non-condensing

Wymiary (szer. x dł. x wys.)

4cell: 160mmx74mmx70mm

6cell/8cell:160mmx148mmx70mm

Informacje o zamawianiu

EPM-1715A-A1R

Supercapacitor Power Module 4cell

EPM-1715C-A1R

Supercapacitor Power Module 8cell

Czym jest EPM-1715?

The EPM-1715 is a przemysłowa i wbudowana płyta główna manufactured by Avalue, designed specifically for motherboard-embedded-peripheral applications. It features sieć of DC Jack 3-pin 2.5mm on board. The Avalue EPM-1715 is a DC to DC 60W power module engineered for industrial environments. It offers a wide input voltage range and provides a stable 12VDC output with a maximum current of 5A. Designed with isolation and protection features, the EPM-1715 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. This module is an excellent choice for embedded systems requiring dependable power solutions.

Najważniejsze cechy i korzyści

Informacje o funkcjach pojawią się wkrótce.

Zastosowania i przykłady użycia

Model EPM-1715 doskonale sprawdza się w różnych zastosowaniach automatyki przemysłowej:

Custom industrial computing solutions
Industrial automation platforms
Embedded system development
Control system integration

EPM-1715

Najważniejsze informacje

Opis produktu

Dane techniczne

Złącze wejścia/wyjścia DC

Złącze zasilania wejściowego

Złącze wyjścia zasilania (DC-12V)

Charakterystyka wejścia/wyjścia DC

Typ zasilania

Superkondensator

Znamionowa moc wyjściowa

Maksymalna moc wyjściowa

Zakres napięcia wejściowego

Zakres napięcia wyjściowego

Zakres tętnień i szumów wyjściowych

Żywotność ogniw superkondensatorowych

Maksymalny prąd wyjściowy (DC-12V)

Parametry mechaniczne i środowiskowe

Temperatura pracy

Temp. przechowywania

Wilgotność pracy

Wymiary (szer. x dł. x wys.)

Informacje o zamawianiu

Informacje o zamawianiu

Czym jest EPM-1715?

Najważniejsze cechy i korzyści

Zastosowania i przykłady użycia

Często zadawane pytania