What are the key features of the EPM-1604 embedded peripheral?

The EPM-1604 provides high-speed digital outputs, isolated channels, and compact design for embedded applications.

What applications is the EPM-1604 suitable for?

It is suitable for machine control, signal switching, and automation systems.

What are embedded peripherals and what are their typical applications?

Embedded peripherals are modular I/O and interface boards designed to expand the capabilities of embedded and industrial systems. They are used in automation, data acquisition, process control, and machine monitoring.

What are the advantages of using embedded peripherals?

They provide flexible I/O expansion, industrial-grade reliability, and easy integration with a wide range of embedded platforms.

What is the typical power input for embedded peripherals?

Most embedded peripherals support wide voltage input ranges (e.g., 9-36V DC) and are designed for low power consumption.

What communication interfaces are supported by embedded peripherals?

Common interfaces include RS-232/422/485, USB, Ethernet, CAN, and GPIO, depending on the model.

Are embedded peripherals compatible with standard industrial protocols?

Many models support protocols such as Modbus, CANopen, and EtherCAT for seamless integration.

What is the operating temperature range for embedded peripherals?

Most models support industrial temperature ranges, typically -40°C to +85°C.

How do I install an embedded peripheral in my system?

Most peripherals support DIN-rail, panel, or board-level mounting. Refer to the product manual for detailed installation steps.

What drivers or software are required for embedded peripherals?

Drivers and SDKs are usually provided for Windows and Linux platforms. Check the product page for downloads and documentation.

How do I connect embedded peripherals to my host system?

Use the appropriate interface cable (USB, serial, Ethernet, etc.) and ensure correct configuration in your system BIOS or OS.

What should I do if my embedded peripheral is not detected?

Check power supply, cable connections, and ensure drivers are properly installed. Try connecting to a different port or system if possible.

How can I update the firmware on my embedded peripheral?

Refer to the product manual for firmware update instructions. Updates are typically performed via USB or serial interface using vendor tools.

What steps should I take if I experience communication errors?

Verify interface settings (baud rate, parity, etc.), check for cable or connector damage, and ensure proper grounding and EMC protection.

Avalue EPM-1604 Módulo hub USB 2.0 de 4 puertos

Descripción del producto

The Avalue EPM-1604 is a compact 4-port USB 2.0 hub module designed for industrial and embedded applications. It provides one USB 2.0 upstream interface and four USB 2.0 Type-A downstream ports, facilitating seamless connectivity for multiple USB devices.

The module supports both +5V and +12V power inputs, selectable via jumper settings, and operates within a wide temperature range of -40°C to +85°C. Its robust design includes vibration resistance of 5G @ 5~500Hz and shock resistance of 10G @ 11ms.

Measuring 80mm x 35mm, the EPM-1604 is an excellent choice for space-constrained environments requiring reliable USB expansion.

Especificaciones técnicas

Interfaz de salida

4 x USB 2.0(Type A female for down port)

Interfaz de entrada

1x USB2.0

Dimensiones

80 x 35(mm)

Formato

USB 2.0

Temp. de funcionamiento

-40°C ~ +85°C

Temp. de almacenamiento

-40°C ~ +85°C

Ensayo de vibración

5G @5~500Hz

Ensayo de choque.

10G @ 11ms

SO

Windows 7/10 and Linux

Información de pedido

Standard Ordering PN:

-EPM-1604-A1R

¿Qué es EPM-1604?

The EPM-1604 is a placa base industrial y embebida manufactured by Avalue, designed specifically for motherboard-embedded-peripheral applications. The Avalue EPM-1604 is a compact 4-port USB 2.0 hub module designed for industrial and embedded applications. It provides one USB 2.0 upstream interface and four USB 2.0 Type-A downstream ports, facilitating seamless connectivity for multiple USB devices. The module supports both +5V and +12V power inputs, selectable via jumper settings, and operates within a wide temperature range of -40°C to +85°C. Its robust design includes vibration resistance of 5G @ 5~500Hz and shock resistance of 10G @ 11ms. Measuring 80mm x 35mm, the EPM-1604 is an excellent choice for space-constrained environments requiring reliable USB expansion.

Características y ventajas principales

Próximamente publicaremos la información sobre las características.

Aplicaciones y casos de uso

El EPM-1604 es ideal para numerosas aplicaciones de automatización industrial:

Custom industrial computing solutions
Industrial and embedded applications
Industrial automation platforms
Embedded system development
Control system integration

EPM-1604

Aspectos destacados

Descripción del producto

Especificaciones técnicas

E/S

Interfaz de salida

Interfaz de entrada

Mecánica y condiciones ambientales

Dimensiones

Formato

Temp. de funcionamiento

Temp. de almacenamiento

Ensayo de vibración

Ensayo de choque.

Soporte de software

SO

Información de pedido

Información de pedido

¿Qué es EPM-1604?

Características y ventajas principales

Aplicaciones y casos de uso

Preguntas frecuentes