Actualités produits1 min de lecture

Moniteurs industriels à châssis ouvert Avalue : de 7" à 21,5" pour l'intégration

TSL Automation Solutions 28 mai 2024 Mis à jour le 18 mai 2026

Moniteur industriel à châssis ouvert série OFM Avalue, TSL Automation Solutions

Sommaire

What Is an Open Frame Monitor?

An open frame monitor is an industrial display module without a front bezel or rear housing, it consists of the LCD panel, controller board, and a mounting frame, designed to be integrated into a customer's own enclosure or panel cutout. Open frame monitors are used in custom HMI panels, kiosks, vending machines, medical devices, and specialised machine operator stations.

Avalue OFM Series: Key Features

Sizes available: 7", 10.1", 12.1", 15", 15.6", 17", 19", 21.5"
Touch technology: PCAP multi-touch (10-point), with optional resistive
Brightness: 350 à 1000 nits depending on model; high-brightness for bright factory environments
Front sealing: IP65 (when installed in cutout), dust and water-jet resistant
Resolution: 1024×768 (4:3) to 1920×1080 FHD (16:9)
Interfaces: HDMI, DisplayPort, VGA (model dependent); USB Type-B for touch
Operating temperature: 0°C to 50°C standard; −20°C to 70°C wide-temp option

Integration Considerations

Open frame monitors require a panel cutout sized to the display's active area plus a sealing gasket for IP65 compliance. Typical mounting is front-panel insert with 4-point or perimeter screw mounting to the enclosure backplate. The rear of the enclosure should allow adequate airflow for the monitor's internal cooling requirements.

TSL Automation supplies Avalue OFM series open frame monitors with local inventory for standard sizes. Custom brightness, interface, and temperature configurations are available on request, contact us for specifications and pricing.

Questions fréquentes

An open frame industrial monitor is a display module without a front bezel or rear housing, consisting of the LCD panel, controller board, and mounting frame, designed to be integrated into a customer's own enclosure or panel cutout. It is used in custom HMI panels, kiosks, vending machines, medical devices, and specialised machine operator stations where a standard boxed monitor does not fit.

Avalue open frame monitors are available from 7" to 21.5", covering all common industrial operator interface sizes. Touch options include PCAP multi-touch (10-point) and resistive touch for gloved-hand applications. Brightness ranges from 350 nits for indoor applications to 1000+ nits for high-ambient-light environments.

Avalue open frame monitors support panel-front mounting (installed from the front of the panel cutout), VESA mounting (standard 75×75mm or 100×100mm VESA pattern), and chassis mounting via side brackets. The mounting method depends on your enclosure design, panel-front mounting is most common for control cabinet integration.

Avalue open frame monitors have IP65 front panel sealing, fully dustproof and protected against water jets from any direction. The rear of an open frame monitor is open (not sealed) as it is integrated into the customer's enclosure. The complete system IP rating depends on the integration enclosure design.

Yes, TSL Automation Solutions stocks and supplies Avalue open frame industrial monitors in India across all sizes and touch configurations. We provide mounting advice and display integration support. Contact our Mumbai team for specifications and pricing.

Mots-clés : Avalue open frame monitor industrial open frame display OFM series Avalue 15 inch open frame monitor PCAP open frame industrial panel mount monitor India

Cet article vous a été utile ? Partagez-le

TSL Automation Solutions

Responsable marketing, TSL Automation Solutions

Sanjana couvre les tendances de l'automatisation industrielle, les lancements de produits et les analyses technologiques pour TSL Automation Solutions, distributeur basé à Mumbai d'IHM, de Panel PC et de systèmes informatiques embarqués au service des industriels en Inde et dans le monde.