What are the key features of the EPM-1721 embedded peripheral?

The EPM-1721 provides versatile digital and analog I/O, wide voltage support, and is designed for harsh industrial environments.

What applications is the EPM-1721 suitable for?

It is used in process control, remote monitoring, and embedded system expansion.

What are embedded peripherals and what are their typical applications?

Embedded peripherals are modular I/O and interface boards designed to expand the capabilities of embedded and industrial systems. They are used in automation, data acquisition, process control, and machine monitoring.

What are the advantages of using embedded peripherals?

They provide flexible I/O expansion, industrial-grade reliability, and easy integration with a wide range of embedded platforms.

What is the typical power input for embedded peripherals?

Most embedded peripherals support wide voltage input ranges (e.g., 9-36V DC) and are designed for low power consumption.

What communication interfaces are supported by embedded peripherals?

Common interfaces include RS-232/422/485, USB, Ethernet, CAN, and GPIO, depending on the model.

Are embedded peripherals compatible with standard industrial protocols?

Many models support protocols such as Modbus, CANopen, and EtherCAT for seamless integration.

What is the operating temperature range for embedded peripherals?

Most models support industrial temperature ranges, typically -40°C to +85°C.

How do I install an embedded peripheral in my system?

Most peripherals support DIN-rail, panel, or board-level mounting. Refer to the product manual for detailed installation steps.

What drivers or software are required for embedded peripherals?

Drivers and SDKs are usually provided for Windows and Linux platforms. Check the product page for downloads and documentation.

How do I connect embedded peripherals to my host system?

Use the appropriate interface cable (USB, serial, Ethernet, etc.) and ensure correct configuration in your system BIOS or OS.

What should I do if my embedded peripheral is not detected?

Check power supply, cable connections, and ensure drivers are properly installed. Try connecting to a different port or system if possible.

How can I update the firmware on my embedded peripheral?

Refer to the product manual for firmware update instructions. Updates are typically performed via USB or serial interface using vendor tools.

What steps should I take if I experience communication errors?

Verify interface settings (baud rate, parity, etc.), check for cable or connector damage, and ensure proper grounding and EMC protection.

Avalue EPM-1721 kolejowy moduł zasilania DC/DC 60W

Opis produktu

The Avalue EPM-1721 is a DC to DC 60W railway power module engineered for demanding railway environments. It offers a wide input voltage range of +9 to 36VDC and provides a stable 12VDC output with a maximum current of 5A.

Designed with 1.5kV isolation and protection features, the EPM-1721 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. Certified with EN50155 and EN50121 standards, it meets stringent railway requirements for safety and performance.

This module is an excellent choice for railway embedded systems requiring dependable power solutions.

Dane techniczne

Złącze zasilania wejściowego

M12 connector

Złącze wyjścia zasilania (DC-12V)

AT 2Px2 connector

Maksymalna moc wyjściowa

60W

Zakres napięcia wejściowego

+9~ 36Vdc

Zakres napięcia wyjściowego

12V

Maksymalny prąd wyjściowy (DC-12V)

5000mA

Napięcie robocze

24Vdc w/ Isolation

Informacje o certyfikacji

EN 50155

EN 50121-3-2

EN 45545

Ochrona wg IEC

IEC 60068-2-64

IEC 60068-2-27

Wymiary

143*43*22mm

Format konstrukcyjny

Customized

Test wibracyjny

5G @5~500Hz

Temperatura pracy

Wide temperature -40°C ~ 85°C.

Temp. przechowywania

-40°C ~ +85°C

Test udarowy

10G @ 11ms

Informacje o zamawianiu

PN:

-EPM-1721-A1R

Czym jest EPM-1721?

The EPM-1721 is a przemysłowa i wbudowana płyta główna manufactured by Avalue, designed specifically for motherboard-embedded-peripheral applications. It features sieć of M12 connector. The Avalue EPM-1721 is a DC to DC 60W railway power module engineered for demanding railway environments. It offers a wide input voltage range of +9 to 36VDC and provides a stable 12VDC output with a maximum current of 5A. Designed with 1.5kV isolation and protection features, the EPM-1721 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. Certified with EN50155 and EN50121 standards, it meets stringent railway requirements for safety and performance. This module is an excellent choice for railway embedded systems requiring dependable power solutions.

Najważniejsze cechy i korzyści

Informacje o funkcjach pojawią się wkrótce.

Zastosowania i przykłady użycia

Model EPM-1721 doskonale sprawdza się w różnych zastosowaniach automatyki przemysłowej:

Custom industrial computing solutions
Industrial automation platforms
Embedded system development
Control system integration

EPM-1721

Najważniejsze informacje

Opis produktu

Dane techniczne

Złącze wejścia/wyjścia DC

Złącze zasilania wejściowego

Złącze wyjścia zasilania (DC-12V)

Charakterystyka wejścia/wyjścia DC

Maksymalna moc wyjściowa

Zakres napięcia wejściowego

Zakres napięcia wyjściowego

Maksymalny prąd wyjściowy (DC-12V)

Napięcie robocze

Certyfikacja

Informacje o certyfikacji

Ochrona wg IEC

Parametry mechaniczne i środowiskowe

Wymiary

Format konstrukcyjny

Test wibracyjny

Temperatura pracy

Temp. przechowywania

Test udarowy

Informacje o zamawianiu

Informacje o zamawianiu

Czym jest EPM-1721?

Najważniejsze cechy i korzyści

Zastosowania i przykłady użycia

Często zadawane pytania