What are the key features of the EPM-1721 embedded peripheral?

The EPM-1721 provides versatile digital and analog I/O, wide voltage support, and is designed for harsh industrial environments.

What applications is the EPM-1721 suitable for?

It is used in process control, remote monitoring, and embedded system expansion.

What are embedded peripherals and what are their typical applications?

Embedded peripherals are modular I/O and interface boards designed to expand the capabilities of embedded and industrial systems. They are used in automation, data acquisition, process control, and machine monitoring.

What are the advantages of using embedded peripherals?

They provide flexible I/O expansion, industrial-grade reliability, and easy integration with a wide range of embedded platforms.

What is the typical power input for embedded peripherals?

Most embedded peripherals support wide voltage input ranges (e.g., 9-36V DC) and are designed for low power consumption.

What communication interfaces are supported by embedded peripherals?

Common interfaces include RS-232/422/485, USB, Ethernet, CAN, and GPIO, depending on the model.

Are embedded peripherals compatible with standard industrial protocols?

Many models support protocols such as Modbus, CANopen, and EtherCAT for seamless integration.

What is the operating temperature range for embedded peripherals?

Most models support industrial temperature ranges, typically -40°C to +85°C.

How do I install an embedded peripheral in my system?

Most peripherals support DIN-rail, panel, or board-level mounting. Refer to the product manual for detailed installation steps.

What drivers or software are required for embedded peripherals?

Drivers and SDKs are usually provided for Windows and Linux platforms. Check the product page for downloads and documentation.

How do I connect embedded peripherals to my host system?

Use the appropriate interface cable (USB, serial, Ethernet, etc.) and ensure correct configuration in your system BIOS or OS.

What should I do if my embedded peripheral is not detected?

Check power supply, cable connections, and ensure drivers are properly installed. Try connecting to a different port or system if possible.

How can I update the firmware on my embedded peripheral?

Refer to the product manual for firmware update instructions. Updates are typically performed via USB or serial interface using vendor tools.

What steps should I take if I experience communication errors?

Verify interface settings (baud rate, parity, etc.), check for cable or connector damage, and ensure proper grounding and EMC protection.

Avalue EPM-1721 Módulo de alimentación CC-CC de 60W para

Descripción del producto

The Avalue EPM-1721 is a DC to DC 60W railway power module engineered for demanding railway environments. It offers a wide input voltage range of +9 to 36VDC and provides a stable 12VDC output with a maximum current of 5A.

Designed with 1.5kV isolation and protection features, the EPM-1721 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. Certified with EN50155 and EN50121 standards, it meets stringent railway requirements for safety and performance.

This module is an excellent choice for railway embedded systems requiring dependable power solutions.

Especificaciones técnicas

Conector de entrada de alimentación

M12 connector

Conector de salida de alimentación (DC-12V)

AT 2Px2 connector

Potencia de salida máxima

60W

Rango de tensión de entrada

+9~ 36Vdc

Rango de tensión de salida

12V

Corriente de salida máxima (DC-12V)

5000mA

Tensión de trabajo

24Vdc w/ Isolation

Información de certificación

EN 50155

EN 50121-3-2

EN 45545

Protección IEC

IEC 60068-2-64

IEC 60068-2-27

Dimensiones

143*43*22mm

Formato

Customized

Ensayo de vibración

5G @5~500Hz

Temp. de funcionamiento

Wide temperature -40°C ~ 85°C.

Temp. de almacenamiento

-40°C ~ +85°C

Ensayo de choque

10G @ 11ms

Información de pedido

PN:

-EPM-1721-A1R

¿Qué es EPM-1721?

The EPM-1721 is a placa base industrial y embebida manufactured by Avalue, designed specifically for motherboard-embedded-peripheral applications. The Avalue EPM-1721 is a DC to DC 60W railway power module engineered for demanding railway environments. It offers a wide input voltage range of +9 to 36VDC and provides a stable 12VDC output with a maximum current of 5A. Designed with 1.5kV isolation and protection features, the EPM-1721 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. Certified with EN50155 and EN50121 standards, it meets stringent railway requirements for safety and performance. This module is an excellent choice for railway embedded systems requiring dependable power solutions.

Características y ventajas principales

Próximamente publicaremos la información sobre las características.

Aplicaciones y casos de uso

El EPM-1721 es ideal para numerosas aplicaciones de automatización industrial:

Custom industrial computing solutions
Industrial automation platforms
Embedded system development
Control system integration

EPM-1721

Aspectos destacados

Descripción del producto

Especificaciones técnicas

Conector de entrada/salida de CC

Conector de entrada de alimentación

Conector de salida de alimentación (DC-12V)

Características de entrada/salida de CC

Potencia de salida máxima

Rango de tensión de entrada

Rango de tensión de salida

Corriente de salida máxima (DC-12V)

Tensión de trabajo

Certificación

Información de certificación

Protección IEC

Mecánica y condiciones ambientales

Dimensiones

Formato

Ensayo de vibración

Temp. de funcionamiento

Temp. de almacenamiento

Ensayo de choque

Información de pedido

Información de pedido

¿Qué es EPM-1721?

Características y ventajas principales

Aplicaciones y casos de uso

Preguntas frecuentes