What are the key features of the EPM-1721 embedded peripheral?

The EPM-1721 provides versatile digital and analog I/O, wide voltage support, and is designed for harsh industrial environments.

What applications is the EPM-1721 suitable for?

It is used in process control, remote monitoring, and embedded system expansion.

What are embedded peripherals and what are their typical applications?

Embedded peripherals are modular I/O and interface boards designed to expand the capabilities of embedded and industrial systems. They are used in automation, data acquisition, process control, and machine monitoring.

What are the advantages of using embedded peripherals?

They provide flexible I/O expansion, industrial-grade reliability, and easy integration with a wide range of embedded platforms.

What is the typical power input for embedded peripherals?

Most embedded peripherals support wide voltage input ranges (e.g., 9-36V DC) and are designed for low power consumption.

What communication interfaces are supported by embedded peripherals?

Common interfaces include RS-232/422/485, USB, Ethernet, CAN, and GPIO, depending on the model.

Are embedded peripherals compatible with standard industrial protocols?

Many models support protocols such as Modbus, CANopen, and EtherCAT for seamless integration.

What is the operating temperature range for embedded peripherals?

Most models support industrial temperature ranges, typically -40°C to +85°C.

How do I install an embedded peripheral in my system?

Most peripherals support DIN-rail, panel, or board-level mounting. Refer to the product manual for detailed installation steps.

What drivers or software are required for embedded peripherals?

Drivers and SDKs are usually provided for Windows and Linux platforms. Check the product page for downloads and documentation.

How do I connect embedded peripherals to my host system?

Use the appropriate interface cable (USB, serial, Ethernet, etc.) and ensure correct configuration in your system BIOS or OS.

What should I do if my embedded peripheral is not detected?

Check power supply, cable connections, and ensure drivers are properly installed. Try connecting to a different port or system if possible.

How can I update the firmware on my embedded peripheral?

Refer to the product manual for firmware update instructions. Updates are typically performed via USB or serial interface using vendor tools.

What steps should I take if I experience communication errors?

Verify interface settings (baud rate, parity, etc.), check for cable or connector damage, and ensure proper grounding and EMC protection.

Avalue EPM-1721 modulo di alimentazione DC/DC 60W per

Descrizione del prodotto

The Avalue EPM-1721 is a DC to DC 60W railway power module engineered for demanding railway environments. It offers a wide input voltage range of +9 to 36VDC and provides a stable 12VDC output with a maximum current of 5A.

Designed with 1.5kV isolation and protection features, the EPM-1721 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. Certified with EN50155 and EN50121 standards, it meets stringent railway requirements for safety and performance.

This module is an excellent choice for railway embedded systems requiring dependable power solutions.

Specifiche tecniche

Connettore di ingresso alimentazione

M12 connector

Connettore di uscita alimentazione (DC-12V)

AT 2Px2 connector

Potenza di uscita massima

60W

Intervallo di tensione di ingresso

+9~ 36Vdc

Intervallo di tensione di uscita

12V

Corrente di uscita massima (DC-12V)

5000mA

Tensione di lavoro

24Vdc w/ Isolation

Informazioni sulle certificazioni

EN 50155

EN 50121-3-2

EN 45545

Protezione IEC

IEC 60068-2-64

IEC 60068-2-27

Dimensioni

143*43*22mm

Fattore di forma

Customized

Test di vibrazione

5G @5~500Hz

Temp. di esercizio

Wide temperature -40°C ~ 85°C.

Temp. di stoccaggio

-40°C ~ +85°C

Test di urto

10G @ 11ms

Informazioni per l'ordine

PN:

-EPM-1721-A1R

Che cos'è EPM-1721?

The EPM-1721 is a scheda madre industriale ed embedded manufactured by Avalue, designed specifically for motherboard-embedded-peripheral applications. The Avalue EPM-1721 is a DC to DC 60W railway power module engineered for demanding railway environments. It offers a wide input voltage range of +9 to 36VDC and provides a stable 12VDC output with a maximum current of 5A. Designed with 1.5kV isolation and protection features, the EPM-1721 ensures reliable power conversion, safeguarding sensitive equipment against voltage fluctuations. Certified with EN50155 and EN50121 standards, it meets stringent railway requirements for safety and performance. This module is an excellent choice for railway embedded systems requiring dependable power solutions.

Caratteristiche e vantaggi principali

Informazioni sulle caratteristiche in arrivo.

Applicazioni e casi d'uso

EPM-1721 è ideale per diverse applicazioni di automazione industriale:

Custom industrial computing solutions
Industrial automation platforms
Embedded system development
Control system integration

EPM-1721

In evidenza

Descrizione del prodotto

Specifiche tecniche

Connettore DC in/out

Connettore di ingresso alimentazione

Connettore di uscita alimentazione (DC-12V)

Caratteristiche DC in/out

Potenza di uscita massima

Intervallo di tensione di ingresso

Intervallo di tensione di uscita

Corrente di uscita massima (DC-12V)

Tensione di lavoro

Certificazione

Informazioni sulle certificazioni

Protezione IEC

Meccanica e ambiente

Dimensioni

Fattore di forma

Test di vibrazione

Temp. di esercizio

Temp. di stoccaggio

Test di urto

Informazioni per l'ordine

Informazioni per l'ordine

Che cos'è EPM-1721?

Caratteristiche e vantaggi principali

Applicazioni e casi d'uso

Domande frequenti