What is the Avalue RCC-ARM-HGD-01R?

The RCC-ARM-HGD-01R is a medical monitor arm from Avalue's RCC series, listed under Intelligent Healthcare in the Medical Cart/Stand/Arm/Battery group. It holds a single display on an articulated arm with swivel, tilt, height adjustment and cable management, so healthcare staff can set the screen at a comfortable position.

What display sizes does the RCC-ARM-HGD-01R support?

The specification lists panel size support of 15 to 24 inches. The arm is specified for a single monitor only. Before ordering, check that your chosen display falls inside this size range and also within the supported weight range, since both limits apply to the mounting.

How much display weight can the arm carry?

The listed display support weight range is 1 to 8 kg. Displays lighter than 1 kg or heavier than 8 kg fall outside the specified range. Tension torque adjustment is provided, which is used to balance the arm for the weight of the display you fit.

Which VESA mounting patterns does it accept?

The display support mounting pattern is listed as 100x100 mm and 75x75 mm. Any monitor or panel PC with one of these VESA hole patterns, and within the stated size and weight limits, can be mounted. M4 is listed as the screw type for the system.

Can the RCC-ARM-HGD-01R hold two monitors?

No. The display type is listed as Single Monitor, so the arm is intended for one display. If your workstation needs two screens, you would need a different mounting solution. TSL Automation Solutions can suggest other options from the Avalue medical cart, stand and arm range.

How much height adjustment does the arm provide?

The height adjust range is listed as 1467 mm. Together with the tension torque adjustment, this lets users raise or lower the display to suit sitting or standing use. The specification gives the range only, so confirm the exact working positions for your installation with TSL if needed.

How far can the display swivel?

The hinge module swivel is +/-185°, the VESA swivel is +/-5°, and the arm swivel is +/-90°. Combined, these let the display be turned toward the user or a patient. Each value is a separate adjustment point in the arm and display mounting.

What tilt angles are available?

The hinge module tilt is -60° to 20°. The arm tilt is listed as 90° for Arm 1 and 82.5° for Arm 2. These adjustments help set the screen angle for different viewing heights and reduce glare or awkward viewing postures during clinical work.

Does the arm have tension adjustment?

Yes. Tension torque adjust is listed as Yes. This allows the arm's holding force to be set for the weight of the mounted display, within the 1 to 8 kg range, so the screen stays where it is placed and can still be repositioned smoothly.

Does it include cable management?

Yes. Cable management is listed as Yes in the specification. This helps route display power and signal cables along the arm, keeping the workstation tidy. The specification does not describe the routing channels in detail, so ask TSL if you need the exact cable capacity.

What are the extended arms?

The specification states that 2 extended arms are provided. They form part of the articulated arm assembly, with Arm 1 tilting 90° and Arm 2 tilting 82.5°. Together with the hinge, they give the reach and positioning flexibility needed for medical workstations.

What are the size and weight of the RCC-ARM-HGD-01R?

The complete system is listed at 200 x 2106 x 1873 mm in W*H*D order, with a net weight of 12.9 kg. Use these figures to plan space and handling during installation. If you need a drawing or clarification of the dimensions, TSL can request it from Avalue.

What materials is the arm made from?

The material is listed as steel, aluminum alloy and plastic, with an M4 screw type. The specification does not state finish, coating or cleaning agent compatibility, so confirm these with TSL Automation Solutions if your hospital has specific hygiene or disinfection requirements.

Does the RCC-ARM-HGD-01R include a computer or I/O ports?

No. The specification covers only mechanical details such as the display mount, swivel, tilt and height. It lists no processor, memory, storage, I/O ports, expansion slots or operating system. You supply the display or panel PC, and the arm holds it in position.

Does the arm need power, and what is its operating temperature?

The specification lists no power input and no operating temperature range. It describes a mechanical arm with tension adjustment, not a powered device. If your environment has particular temperature or cleanliness conditions, ask TSL to confirm suitability with Avalue before ordering.

How is the arm mounted or fixed in place?

The specification lists the complete system dimensions, weight and display mounting pattern, but not the base or fixing method. It is grouped under Medical Cart/Stand/Arm/Battery. Please confirm the base arrangement and installation requirements with TSL Automation Solutions before you plan the site or workstation.

Can I mount an Avalue medical panel PC on it?

Possibly. The arm accepts 100x100 and 75x75 mm VESA patterns, 15 to 24 inch panels and 1 to 8 kg display weight. If the Avalue panel PC you have in mind meets all three limits, it is a candidate. Send TSL the model and we will check it.

Where can the RCC-ARM-HGD-01R be used?

It suits healthcare settings that need a height and angle adjustable display, such as hospital wards, clinics and medical workstations. The specification lists it under Intelligent Healthcare. It is intended for a single display, so it fits workstations where one screen shows patient or device information.

How does it compare with the RCC-CAR-HGD-02R?

The sibling RCC-CAR-HGD-02R is published as a medical cart supporting 21.5 to 24 inch displays, while the RCC-ARM-HGD-01R is a monitor arm listing 15 to 24 inch single displays, 1 to 8 kg and 1467 mm height range. Choose by whether you need a mobile cart or an adjustable arm.

Does TSL provide warranty and support in India?

TSL Automation Solutions is an authorised India distributor of Avalue industrial computers and supplies and supports the RCC-ARM-HGD-01R. Contact TSL for quotations, delivery, installation questions and after-sales support. Warranty terms are not part of the product specification, so ask TSL for the terms that apply to your order.

How do I choose between this arm and other Avalue medical stands?

Start with your display: single screen, 15 to 24 inches, 1 to 8 kg, and a VESA 100x100 or 75x75 pattern. Then consider the height range of 1467 mm and the swivel and tilt you need. TSL can compare it with other Avalue carts, stands and arms for you.

Avalue · Intelligent Healthcare

RCC-ARM-HGD-01R

Data Sheet

*Price on request. Contact us for a quote.

Manufacturer: Avalue

Highlights

Supports a single monitor, 15 to 24 inch panel sizes
Display weight range of 1 to 8 kg
VESA mounting patterns 100x100 and 75x75 mm
Height adjust range of 1467 mm
Hinge swivel +/-185° and tilt -60° to 20°
Arm swivel +/-90°, arm tilt 90° (Arm 1) and 82.5° (Arm 2)
Tension torque adjustment and cable management
Two extended arms provided
Steel, aluminum alloy and plastic construction with M4 screws
Net weight 12.9 kg

Product Description

The Avalue RCC-ARM-HGD-01R is a medical monitor arm in the RCC series for Intelligent Healthcare, built to carry a single 15 to 24 inch display weighing 1 to 8 kg.

It mounts displays on 100x100 or 75x75 mm VESA patterns and offers a 1467 mm height adjust range, tension torque adjustment, two extended arms and built-in cable management. The hinge swivels +/-185° and tilts from -60° to 20°, so clinicians can position the screen at the bedside or workstation.

The frame uses steel, aluminum alloy and plastic with M4 screws and has a net weight of 12.9 kg. TSL Automation Solutions supplies and supports the RCC-ARM-HGD-01R across India for hospitals, clinics and medical workstation builds.

Technical Specifications

Net Weight

12.9 Kg

Dimension(WHD)

200 x 2106 x 1873mm

Screw Type

Material

Steel/Aluminum Alloy/Plastic

Hinge Module Swivel(Hinge)

+/-185°

Hinge Module Swivel(VESA)

+/-5°

Hinge Module Tilt(Hinge)

-60° ~ 20°

Display Support Mounting Pattern

100x100 / 75x75 mm

Display Type

Single Monitor

Panel Size Support

15"~24"

Display Support Weight (Range)

1~8 kg

ARM Swivel

+/-90°

Height Adjust Range

1467 mm

Tension Torque Adjust

Yes

Tilt (Arm 1)

90°

Tilt (Arm 2)

82.5°

Cable Management

Yes

Extended Arm Provided

What is RCC-ARM-HGD-01R?

The RCC-ARM-HGD-01R is a intelligent healthcare manufactured by Avalue, designed specifically for medical-cart-stand-arm-battery applications. It features display of 100x100 / 75x75 mm. The Avalue RCC-ARM-HGD-01R is a medical monitor arm in the RCC series for Intelligent Healthcare, built to carry a single 15 to 24 inch display weighing 1 to 8 kg. It mounts displays on 100x100 or 75x75 mm VESA patterns and offers a 1467 mm height adjust range, tension torque adjustment, two extended arms and built-in cable management. The hinge swivels +/-185° and tilts from -60° to 20°, so clinicians can position the screen at the bedside or workstation. The frame uses steel, aluminum alloy and plastic with M4 screws and has a net weight of 12.9 kg. TSL Automation Solutions supplies and supports the RCC-ARM-HGD-01R across India for hospitals, clinics and medical workstation builds.

Key Features & Benefits

Supports a single monitor, 15 to 24 inch panel sizes
Display weight range of 1 to 8 kg
VESA mounting patterns 100x100 and 75x75 mm
Height adjust range of 1467 mm
Hinge swivel +/-185° and tilt -60° to 20°
Arm swivel +/-90°, arm tilt 90° (Arm 1) and 82.5° (Arm 2)
Tension torque adjustment and cable management
Two extended arms provided
Steel, aluminum alloy and plastic construction with M4 screws
Net weight 12.9 kg

Applications & Use Cases

The RCC-ARM-HGD-01R is ideal for various industrial automation applications:

Panel-mounted installations and control cabinets
Visual monitoring and data display systems
Healthcare and medical device integration
Industrial automation and control
Manufacturing process monitoring
Quality assurance and inspection
Production line automation

RCC-ARM-HGD-01R

Highlights

Product Description

Technical Specifications

Complete System

Net Weight

Dimension(WHD)

Screw Type

Material

Display System

Hinge Module Swivel(Hinge)

Hinge Module Swivel(VESA)

Hinge Module Tilt(Hinge)

Display Support Mounting Pattern

Display Type

Panel Size Support

Display Support Weight (Range)

ARM Swivel

Height Adjust Range

Tension Torque Adjust

Tilt (Arm 1)

Tilt (Arm 2)

Cable Management

Extended Arm Provided

What is RCC-ARM-HGD-01R?

Key Features & Benefits

Applications & Use Cases

Frequently Asked Questions

Highlights

Product Description

Technical Specifications

Complete System

Net Weight

Dimension(W*H*D)

Screw Type

Material

Display System

Hinge Module Swivel(Hinge)

Hinge Module Swivel(VESA)

Hinge Module Tilt(Hinge)

Display Support Mounting Pattern

Display Type

Panel Size Support

Display Support Weight (Range)

ARM Swivel

Height Adjust Range

Tension Torque Adjust

Tilt (Arm 1)

Tilt (Arm 2)

Cable Management

Extended Arm Provided

What is RCC-ARM-HGD-01R?

Key Features & Benefits

Applications & Use Cases

Frequently Asked Questions

Dimension(WHD)