What is the Avalue RCC-BAT-GENI-01R?

The RCC-BAT-GENI-01R is an Avalue hot-swappable battery power module in the RCC intelligent healthcare range, listed under Medical Cart/Stand/Arm/Battery. It stores 216 Wh at 21.6 V and uses lithium-ion chemistry. It is designed to keep medical equipment powered during shifts, and TSL Automation Solutions supplies it in India.

What are the output voltage and capacity of the RCC-BAT-GENI-01R?

The module has an output voltage of 21.6 V, a power capacity of 216 Wh and a charge capacity of 10 Ah. These figures come from the Avalue specification table. Please confirm the load requirements of your equipment against these ratings with TSL before ordering, so the module matches your cart or device.

How long does the RCC-BAT-GENI-01R take to recharge?

The typical recharge time is 2.5 hours at 4 A. The specification lists this as a typical figure, so actual time can vary with the state of charge and conditions. Modules can also be charged whilst equipment is being used, which helps keep workstations running between shifts.

Does the RCC-BAT-GENI-01R support hot swapping?

Yes. The module has a hot swap feature for uninterruptible operation, and the Snap and Go design allows quick module changes. This means a charged module can replace a depleted one without interrupting the equipment, which suits busy healthcare settings that cannot afford downtime during a shift.

Can the module be charged while the equipment is in use?

Yes. Avalue states that modules can be charged whilst equipment is being used. Combined with hot swap and Snap and Go module changes, this supports continuous operation. Contact TSL for the charging arrangement that suits your specific cart or stand, as the specification table does not detail charger models.

What is the IP rating, and is the module easy to clean?

The module is rated IP67, and Avalue highlights waterproof construction and easy antibacterial cleaning. This makes it practical for healthcare settings where surfaces are cleaned often. Follow your hospital's cleaning policy and the manufacturer's guidance on approved cleaning agents, which TSL can help you obtain.

What battery chemistry and cycle life does it offer?

The specification lists Polymer Lithium-Ion chemistry, and the feature list mentions the latest NMC Lithium-Ion technology. Avalue states a minimum of 1000 cycles. Actual service life depends on usage, charging habits and temperature, so treat the cycle figure as the stated minimum rather than a guarantee of calendar life.

What is the operating and storage temperature range?

The operating temperature is 1°C to 40°C (34°F to 104°F). The storage temperature is -10°C to 35°C (14°F to 95°F). Note that the storage range tops out lower than the operating range, so avoid leaving spare modules in hot stores or vehicles, and plan placement of the module accordingly.

How can I check the remaining charge?

A 10 segment LED bar graph shows the charge status, so staff can check the remaining charge at a glance before deciding whether to swap a module. The module also has a capacitive touch standby switch, which the Avalue specification table lists as a separate control from the charge display.

What kind of standby switch does the RCC-BAT-GENI-01R have?

The specification lists the standby switch as capacitive touch, meaning it is touch sensitive rather than a mechanical switch. Details of the exact standby behaviour are not given in the specification table, so ask TSL to confirm them from Avalue documentation before you finalise a design or purchase.

Which certifications does the RCC-BAT-GENI-01R carry?

The compliance list includes UKCA, CE, UN38.3, IEC 62133 and UL 2054. The IEC 62133 and UL 2054 items relate to the internal cell pack, as noted in the specification. UN38.3 covers transport testing of lithium batteries. Ask TSL for documents if your hospital procurement or tender requires them.

How heavy is the module?

The net weight is 2 kg per module. This is useful when planning how many spares a cart or stand will carry and how staff will handle swaps. Check the weight rating of your cart or arm, and keep in mind the combined weight of all modules that will be fitted at one time.

Which carts or stands is the RCC-BAT-GENI-01R compatible with?

The specification table does not list compatible carts. The published RCC-GENICART-02R listing mentions a GeniTec power module (IP67) for shift-to-shift use, but you should confirm exact compatibility of the RCC-BAT-GENI-01R with your cart, stand or arm model with TSL before ordering.

How does the RCC-BAT-GENI-01R compare with the RCC-GENICART-02R?

The RCC-GENICART-02R is a height-adjustable medical IT cart with a dual power system, while the RCC-BAT-GENI-01R is a battery power module. They are different product types: the cart carries equipment and the module supplies power. Both sit in the Medical Cart/Stand/Arm/Battery sub-category. Ask TSL how they pair.

Does the module include a computer, display or I/O ports?

No. It is a power module, so the specification has no processor, memory, display, storage or I/O ports. It supplies 21.6 V power to compatible equipment. If you also need a medical panel PC for your workstation, TSL can recommend suitable Avalue systems, such as those in the HID series.

Which operating system does the RCC-BAT-GENI-01R support?

Not applicable. The RCC-BAT-GENI-01R is a battery module with no operating system, processor or storage. Any operating system requirement belongs to the computer or medical device it powers. TSL can advise on Avalue panel PCs and their supported operating systems if you are building a complete workstation.

How is the RCC-BAT-GENI-01R mounted or changed?

The specification does not describe a mounting method, but the Snap and Go design means modules are changed by snapping them in and out. The mounting arrangement depends on the cart, stand or arm it is fitted to. Please share your cart model with TSL so the fit can be confirmed.

What applications is the RCC-BAT-GENI-01R suited to?

It suits healthcare uses such as patient monitoring, electronic medical records and point of care workstations on mobile carts, where equipment must stay powered between charges. The RCC range targets intelligent healthcare, so hospitals and clinics are the intended settings, with any specific use confirmed with TSL before purchase.

What is the Elektra Awards mention about?

Avalue lists the power system as Power system product of the year at the Elektra Awards. This is a manufacturer claim in the feature list. The sibling RCC-GENICART-02R listing also describes an award winning hot-swappable power solution. Ask TSL if you need more detail on the award or the power system.

Does TSL supply and support the RCC-BAT-GENI-01R in India?

Yes. TSL Automation Solutions is an authorised India distributor of Avalue industrial computers. We supply the RCC-BAT-GENI-01R in India and provide pre-sales selection help and support. Contact TSL with your cart model, load and quantity, and the team will confirm availability, pricing and delivery details.

What warranty applies to the RCC-BAT-GENI-01R?

Warranty terms are not stated in the specification table. TSL supplies and supports Avalue products in India, so please request the warranty period and conditions for the RCC-BAT-GENI-01R in your quotation. Having the terms in writing helps when you plan spare modules and replacement cycles for your fleet of carts.

Can the RCC-BAT-GENI-01R be shipped as spare stock?

The compliance list includes UN38.3, the test standard used for transporting lithium batteries, which is relevant when moving modules. Final shipping rules depend on the carrier and route, so TSL can advise on handling and delivery when you order spare modules for your hospital or clinic fleet.

Is the RCC-BAT-GENI-01R a new Avalue product?

Avalue lists the RCC-BAT-GENI-01R with a New status in its catalogue, and TSL has added it to its range. Availability, lead time and pricing in India should be confirmed with TSL at the time of your enquiry, as they can change from one order to the next.

Avalue · Intelligent Healthcare

RCC-BAT-GENI-01R

Thumbnail: RCC-BAT-GENI-01R side angle 2

Thumbnail: RCC-BAT-GENI-01R side angle 3

Data Sheet

*Price on request. Contact us for a quote.

Manufacturer: Avalue

Highlights

21.6 V, 216 Wh (10 Ah) power module
Hot swap feature for uninterruptible operation
Snap and Go module changes
Modules can be charged whilst equipment is being used
Waterproof IP67 with easy antibacterial cleaning
Latest NMC Lithium-Ion technology, minimum 1000 cycles
Recharge in 2.5 hrs (typ) @ 4 A
LED 10 segment bar graph and capacitive touch standby switch
UKCA, CE, UN38.3 compliance; net weight 2 kg
Power system product of the year, Elektra Awards

Product Description

The Avalue RCC-BAT-GENI-01R is a hot-swappable lithium-ion power module from the RCC intelligent healthcare range, built for medical carts, stands and arms. It delivers 21.6 V at 216 Wh (10 Ah), is rated IP67 for easy antibacterial cleaning, and offers a minimum of 1000 cycles.

Modules snap in and out, can be charged while equipment is in use, and the hot swap feature keeps devices running without interruption. A 10 segment LED bar graph shows charge status and a capacitive touch switch controls standby.

It suits patient monitoring, electronic records and point of care workstations in hospitals and clinics. TSL Automation Solutions supplies and supports the RCC-BAT-GENI-01R across India.

Technical Specifications

Output Voltage

21.6 V

Power Capacity

216 Wh

Charge Capacity

10 Ah

Recharge Time

2.5 hrs (typ) @ 4 A

Operating Temperature

1°C ~ 40°C (34°F ~ 104°F)

Storage Temperature

-10°C ~ 35°C (14°F ~ 95°F)

Battery Chemistry

Polymer Lithium-Ion

IP Rating

IP67

Charge Status Display

LED 10 Segment Bar Graph

Standby Switch

Capacitive Touch

Compliance

UKCA, CE, UN38.3,

IEC 62133＊, UL 2054＊

(＊Relates to internal cell pack)

Net Weight

2 kg

What is RCC-BAT-GENI-01R?

The RCC-BAT-GENI-01R is a intelligent healthcare manufactured by Avalue, designed specifically for medical-cart-stand-arm-battery applications. It features display of LED 10 Segment Bar Graph, storage of -10°C ~ 35°C (14°F ~ 95°F) and operating temperature of 1°C ~ 40°C (34°F ~ 104°F). The Avalue RCC-BAT-GENI-01R is a hot-swappable lithium-ion power module from the RCC intelligent healthcare range, built for medical carts, stands and arms. It delivers 21.6 V at 216 Wh (10 Ah), is rated IP67 for easy antibacterial cleaning, and offers a minimum of 1000 cycles. Modules snap in and out, can be charged while equipment is in use, and the hot swap feature keeps devices running without interruption. A 10 segment LED bar graph shows charge status and a capacitive touch switch controls standby. It suits patient monitoring, electronic records and point of care workstations in hospitals and clinics. TSL Automation Solutions supplies and supports the RCC-BAT-GENI-01R across India.

Key Features & Benefits

21.6 V, 216 Wh (10 Ah) power module
Hot swap feature for uninterruptible operation
Snap and Go module changes
Modules can be charged whilst equipment is being used
Waterproof IP67 with easy antibacterial cleaning
Latest NMC Lithium-Ion technology, minimum 1000 cycles
Recharge in 2.5 hrs (typ) @ 4 A
LED 10 segment bar graph and capacitive touch standby switch
UKCA, CE, UN38.3 compliance; net weight 2 kg
Power system product of the year, Elektra Awards

Applications & Use Cases

The RCC-BAT-GENI-01R is ideal for various industrial automation applications:

Harsh industrial environments requiring dust and water protection
DC-powered industrial installations and mobile applications
Interactive control interfaces and operator panels
Visual monitoring and data display systems
Healthcare and medical device integration
Industrial automation and control
Manufacturing process monitoring
Quality assurance and inspection