What is the Avalue RCC-BAT-GENI-02R?

The RCC-BAT-GENI-02R is a wall-mount bay charger in Avalue's RCC series, listed under Intelligent Healthcare and the Medical Cart/Stand/Arm/Battery sub-category. It charges batteries using a Smart (Multi Chemistry) method and has an internal medical grade power supply. It is a charging accessory, not a computer or display, and is currently listed with New status.

What charge method does the RCC-BAT-GENI-02R use?

The specification lists the charge method as Smart (Multi Chemistry). This means the charger is designed to handle more than one battery chemistry rather than a single fixed type. The datasheet does not name the individual chemistries, so please share your battery model with TSL and we will confirm suitability before you order.

What is the maximum charge current per bay?

The maximum charge current is 3.75 A per bay. The specification gives this as a per-bay maximum, so the actual current delivered will depend on the connected battery and the smart charge control. Use this figure when matching the charger to the batteries used in your carts or equipment.

How long does it take to recharge a battery?

The typical recharge time is 2.75 hours. This is a typical value from the specification, and real charging time can vary with the battery being charged and its state of discharge. If you plan shift-based use, confirm your battery details with TSL so the charging schedule can be planned properly.

What input voltage does the charger accept?

The input voltage range is 90-264 VAC with an input frequency of 47-63 Hz. This wide range covers common mains supplies, including 230 V at 50 Hz, so no external voltage converter is needed for standard Indian installations. Use a properly earthed outlet, as the unit is Class I.

What is the input current of the RCC-BAT-GENI-02R?

The input current is 4.2 A at 115 VAC, 60 Hz and 2.1 A at 230 VAC, 50 Hz. In India, where 230 V at 50 Hz is the standard supply, you should plan for the 2.1 A figure when sizing the circuit and any protective devices for the installation.

Can I run it from 230 V, 50 Hz Indian mains?

Yes. The input range of 90-264 VAC and 47-63 Hz includes 230 VAC at 50 Hz, and the specification lists 2.1 A input current at that condition. The charger therefore works from standard Indian mains without a transformer. Make sure the outlet is earthed, because the power supply is IEC Class I.

What does IEC Protection Class I mean for this charger?

The specification lists IEC Protection as Class I, with an internal medical grade power supply. Class I equipment relies on a protective earth connection in addition to basic insulation, so it must be connected to a properly earthed mains outlet. Your electrician or biomedical team should verify the earthing during installation.

Which standards and approvals does it carry?

The compliance entry in the specification lists CE, FCC and EN/ES/IEC 60601-1. IEC 60601-1 is the general safety standard for medical electrical equipment. If your hospital or tender requires specific certificates or test reports, ask TSL and we will request the relevant documents from Avalue.

What is the operating temperature range?

The operating temperature is 1°C to 40°C (34°F to 104°F). This suits normally air-conditioned or ventilated hospital and clinic areas. Avoid installing it near heat sources or in enclosed spaces without airflow, and keep it inside the stated range during charging for reliable operation.

What is the storage temperature range?

The storage temperature is -10°C to 35°C (14°F to 95°F). Keep the unit within this range if it is stored before installation or taken out of service for a period. Note that the upper storage limit is lower than the operating maximum of 40°C, so avoid hot warehouses or vehicles.

How is the RCC-BAT-GENI-02R mounted?

The installation method in the specification is Wall Mount. It is intended to be fixed to a wall at a charging point rather than fitted to a cart. With a net weight of 8.55 kg, make sure the wall and fixings you choose are suitable for the load, and have the mounting done by qualified personnel.

How heavy is the charger?

The net weight is 8.55 kg and the shipping weight is 10.05 kg. Use the net weight when planning wall fixings and the shipping weight when arranging transport and handling. Dimensions are not given in the information supplied here, so ask TSL if you need them for space planning.

How many battery bays does it have?

The specification we hold lists charge current per bay but does not state the number of bays, so we do not quote a figure here. Please contact TSL with your requirement and we will confirm the bay count and layout with Avalue before you finalise your order.

Which batteries are compatible with the RCC-BAT-GENI-02R?

The charger is described as Smart (Multi Chemistry) with up to 3.75 A per bay, but the specification does not list compatible battery models. As the part sits in the RCC series for medical carts and batteries, send TSL your cart or battery model and we will confirm compatibility with Avalue.

Does the charger include a computer or display?

No. The RCC-BAT-GENI-02R is a bay charger and its specification covers only power, charging, environmental and mechanical details. If you need a panel PC, monitor or other computing hardware for a medical workstation, TSL can supply suitable Avalue products alongside the charger.

Does it need an external power adapter?

The specification states an internal medical grade power supply, so the AC input at 90-264 VAC is handled inside the unit. You connect it to the mains and do not need a separate external adapter for the charger itself. Confirm cabling and plug requirements with TSL for your installation.

What applications is the RCC-BAT-GENI-02R suitable for?

It suits healthcare settings such as hospital wards, clinics and nursing stations where battery-powered equipment or medical carts need a fixed charging point. Its medical grade power supply and IEC 60601-1 compliance support these uses. Share your workflow with TSL and we can advise on the full set of products required.

How does it compare with the RCC-GENICART-02R?

They are different product types in the same Avalue RCC family. The RCC-GENICART-02R is a height-adjustable medical IT cart with a dual power system, while the RCC-BAT-GENI-02R is a wall-mount smart bay charger. The cart carries equipment around the ward, and the charger provides a fixed place to recharge batteries.

Can it be used together with the RCC-GENICART-02R?

Both belong to Avalue's RCC range for Intelligent Healthcare, but the specification does not state a direct compatibility between the two. If you plan to use them in the same deployment, tell TSL your battery and cart configuration and we will confirm the combination with Avalue before purchase.

Does TSL supply and support the RCC-BAT-GENI-02R in India?

Yes. TSL Automation Solutions is an authorised India distributor of Avalue industrial computers and supplies and supports the RCC-BAT-GENI-02R in India. You can contact TSL for pricing, availability, technical questions on selection and installation, and help with documentation for your project or tender.

What warranty applies to the RCC-BAT-GENI-02R?

The specification does not state a warranty period, so we do not quote one here. Warranty terms and after-sales support are handled through TSL as the authorised Avalue distributor in India. Please ask TSL for the current warranty conditions for this model when you request your quotation.

How do I choose between this charger and other RCC products?

Start with what you need to do. Choose the RCC-BAT-GENI-02R if you want a wall-mounted, multi-chemistry smart charging point rated to 3.75 A per bay. Choose a cart or stand if you need mobility or equipment mounting. TSL can recommend the right RCC combination for your clinical workflow.

Avalue · Intelligent Healthcare

RCC-BAT-GENI-02R

Thumbnail: RCC-BAT-GENI-02R side angle 2

Data Sheet

*Price on request. Contact us for a quote.

Manufacturer: Avalue

Highlights

Smart multi-chemistry charge method
Charge current up to 3.75 A per bay
Typical recharge time of 2.75 hours
Wide input: 90-264 VAC, 47-63 Hz
Internal medical grade power supply, IEC Class I
CE, FCC and EN/ES/IEC 60601-1 compliance
Wall mount installation
Operating temperature 1°C to 40°C
Net weight 8.55 kg

Product Description

The Avalue RCC-BAT-GENI-02R is a wall-mount smart bay charger from the RCC series in Avalue's Intelligent Healthcare range. It uses a Smart (Multi Chemistry) charge method with up to 3.75 A per bay and a typical recharge time of 2.75 hours.

An internal medical grade power supply (Class I) accepts 90-264 VAC at 47-63 Hz, so it runs directly from Indian mains. The unit is rated CE, FCC and EN/ES/IEC 60601-1 and operates from 1°C to 40°C.

It suits hospital wards, clinics and mobile workstation programmes that rely on battery-powered equipment and need a central charging point. TSL Automation Solutions supplies and supports the RCC-BAT-GENI-02R in India.

Technical Specifications

IEC Protection

Class I

(Internal Medical Grade Power Supply)

Input Voltage

90-264 VAC

Input Current

4.2 A @ 115 VAC, 60 Hz

2.1 A @ 230 VAC, 50 Hz

Input Frequency

47-63 Hz

Charge Current

3.75 A (max/bay)

Recharge Time

2.75 hrs (typ)

Operating Temperature

1°C ~ 40°C (34°F ~ 104°F)

Storage Temperature

-10°C ~ 35°C (14°F ~ 95°F)

Charge Method

Smart (Multi Chemistry)

Compliance

CE, FCC , EN/ES/IEC 60601-1

Net Weight

8.55 kg

Shipping Weight

10.05 kg

Installation method

Wall Mount

What is RCC-BAT-GENI-02R?

The RCC-BAT-GENI-02R is a intelligent healthcare manufactured by Avalue, designed specifically for medical-cart-stand-arm-battery applications. It features storage of -10°C ~ 35°C (14°F ~ 95°F), operating temperature of 1°C ~ 40°C (34°F ~ 104°F) and certification of CE, FCC , EN/ES/IEC 60601-1. The Avalue RCC-BAT-GENI-02R is a wall-mount smart bay charger from the RCC series in Avalue's Intelligent Healthcare range. It uses a Smart (Multi Chemistry) charge method with up to 3.75 A per bay and a typical recharge time of 2.75 hours. An internal medical grade power supply (Class I) accepts 90-264 VAC at 47-63 Hz, so it runs directly from Indian mains. The unit is rated CE, FCC and EN/ES/IEC 60601-1 and operates from 1°C to 40°C. It suits hospital wards, clinics and mobile workstation programmes that rely on battery-powered equipment and need a central charging point. TSL Automation Solutions supplies and supports the RCC-BAT-GENI-02R in India.

Key Features & Benefits

Smart multi-chemistry charge method
Charge current up to 3.75 A per bay
Typical recharge time of 2.75 hours
Wide input: 90-264 VAC, 47-63 Hz
Internal medical grade power supply, IEC Class I
CE, FCC and EN/ES/IEC 60601-1 compliance
Wall mount installation
Operating temperature 1°C to 40°C
Net weight 8.55 kg

Applications & Use Cases

The RCC-BAT-GENI-02R is ideal for various industrial automation applications:

DC-powered industrial installations and mobile applications
Extreme temperature environments and outdoor installations
Medical device integration and healthcare applications
Healthcare and medical device integration
Industrial automation and control
Manufacturing process monitoring
Quality assurance and inspection
Production line automation