What is the RCC-BAT-GENI-03R?

The RCC-BAT-GENI-03R is an Avalue bay charger in the RCC series, listed under Intelligent Healthcare in the Medical Cart, Stand, Arm and Battery group. It charges batteries using a smart multi chemistry method and is installed on a wall. TSL Automation Solutions supplies and supports it in India.

What input voltage does the RCC-BAT-GENI-03R need?

It is powered from a 28VDC external PSU. The specification lists the 28VDC external supply as the input, so the power supply unit sits outside the charger. Please confirm the matching PSU with TSL when you order so that the complete charging set is supplied together.

What is the maximum input current?

The maximum input current is 7.0 A. This is the figure to use when sizing the 28VDC external power supply and planning the wall location and cabling for the charger. If you need help matching a supply to your installation, TSL can advise before you place the order.

What charge current does each bay provide?

The specification gives a charge current of 3.75 A maximum per bay. This is a maximum value, so the actual current delivered depends on the battery being charged and the smart charging logic. Contact TSL with your battery details if you need to confirm suitability.

How long does a recharge take?

The typical recharge time is 2.75 hours. This is a typical figure, so real charging time will depend on the battery connected and its state of charge. For planning shift-to-shift battery rotation, discuss your battery type and usage pattern with TSL before finalising your setup.

What charge method does it use?

The charge method is listed as Smart (Multi Chemistry). This means the charger is designed to handle more than one battery chemistry using smart charging control. The spec does not name individual chemistries, so please check your battery type with TSL before ordering.

How many battery bays does the RCC-BAT-GENI-03R have?

The specification we hold states the charge current per bay but does not state the total number of bays. To avoid any mismatch with your battery count, please ask TSL to confirm the bay count of the RCC-BAT-GENI-03R before you place an order.

Which batteries can I charge with it?

The charger is described as smart and multi chemistry, but the specification does not list specific battery models or pack types. Share your battery make, model and chemistry with TSL Automation Solutions and we will confirm compatibility with Avalue before you commit to a purchase.

What is the operating temperature range?

The operating temperature range is 1°C to 40°C (34°F to 104°F). Install the charger in a space that stays within this range, such as a ward, nursing station or clinic corridor. Locations that fall below 1°C or exceed 40°C are outside the rated operating conditions.

What is the storage temperature range?

The storage temperature range is -10°C to 35°C (14°F to 95°F). Keep the charger within this range while it is in a warehouse or in transit before installation. Note that the upper storage limit of 35°C is lower than the upper operating limit of 40°C.

How is the RCC-BAT-GENI-03R mounted?

The installation method is Wall Mount. Choose a wall location close to where batteries are swapped, with access to the 28VDC external power supply and enough clearance for handling batteries. The specification lists wall mounting only, so plan your layout around that.

How heavy is the charger?

The net weight is 2.05 kg and the shipping weight is 2.8 kg. At around two kilograms the unit is light for a wall-mounted device, but you should still use wall fixings suitable for your wall type and the weight of the charger with batteries seated.

What compliance does it carry?

The specification lists CE compliance. No other certifications are shown in the data we hold for this model. If your hospital procurement requires additional approvals or test reports, please ask TSL and we will check with Avalue what documentation is available.

Does the RCC-BAT-GENI-03R include a CPU, display or storage?

No. This is a battery bay charger, not a computer. The specification contains only charger details such as input voltage, charge current, recharge time and temperature ranges. It has no processor, display, storage or expansion slots, and these topics do not apply to this model.

Does it need an operating system or software?

No operating system is listed because the RCC-BAT-GENI-03R is a charger and not a computing device. The specification describes power and charging parameters only. For Avalue panel PCs or medical computers that run an OS, TSL can recommend suitable models separately.

What applications is it suited for?

It is listed under Intelligent Healthcare and the Medical Cart, Stand, Arm and Battery group, so it fits hospitals and clinics that run battery-powered mobile workstations and point of care equipment. It provides a fixed, wall-mounted place to recharge batteries between shifts.

Can it be fitted onto a medical cart?

The only installation method in the specification is Wall Mount. It is therefore intended to be fixed to a wall rather than built into a cart. If you want a charging arrangement that involves a cart, please discuss your layout with TSL before ordering.

How does the RCC-BAT-GENI-03R compare with the RCC-GENICART-02R?

They serve different purposes. The RCC-GENICART-02R is a height-adjustable medical IT cart with a dual power system, while the RCC-BAT-GENI-03R is a wall-mount bay charger. They are not substitutes. TSL can advise whether your setup needs one or both.

Is the RCC-BAT-GENI-03R a new model?

Yes, Avalue lists the RCC-BAT-GENI-03R with a status of New. As a recent addition to the RCC series, it is worth confirming current availability and lead time with TSL Automation Solutions when you plan a project, so your delivery dates are realistic.

Can the charger be used in a cold room?

The minimum operating temperature is 1°C, so the charger is not rated for use below that. It is intended for normal indoor healthcare spaces within 1°C to 40°C. Please avoid cold rooms or unheated areas that could fall outside this range.

Does TSL Automation Solutions supply it in India?

Yes. TSL Automation Solutions is an authorised India distributor of Avalue industrial computers and healthcare products. We supply the RCC-BAT-GENI-03R in India and provide pre-sales selection help and after-sales support. Contact us with your quantity and location for a quotation.

What warranty and support does TSL provide?

TSL supplies the RCC-BAT-GENI-03R as an authorised Avalue distributor in India and supports it after purchase. Warranty terms are confirmed on your quotation, since they are not part of the technical specification. Contact TSL for installation questions and service assistance.

What should I send TSL to get a quotation?

Please send the model RCC-BAT-GENI-03R, your required quantity, the battery make and chemistry you plan to charge, the intended wall location, and your delivery city. TSL will confirm the bay count, power supply requirement and availability, then prepare a quotation.

Avalue · Intelligent Healthcare

RCC-BAT-GENI-03R

Data Sheet

*Price on request. Contact us for a quote.

Manufacturer: Avalue

Highlights

Smart multi chemistry charge method
28VDC external PSU input
Input current 7.0 A (max)
Charge current 3.75 A (max per bay)
Typical recharge time 2.75 hrs
Wall mount installation
Operating temperature 1°C to 40°C
CE compliance
Net weight 2.05 kg (shipping 2.8 kg)

Product Description

The Avalue RCC-BAT-GENI-03R is a wall-mount smart bay charger from the RCC series, listed under Intelligent Healthcare in the Medical Cart, Stand, Arm and Battery group.

It is powered from a 28VDC external PSU with a maximum input current of 7.0 A, and delivers up to 3.75 A per bay using a smart multi chemistry charge method, with a typical recharge time of 2.75 hours. It operates from 1°C to 40°C, carries CE compliance and weighs 2.05 kg net.

It suits hospitals and clinics that need organised, dependable battery charging for mobile medical workstations and point of care equipment. TSL Automation Solutions supplies and supports the RCC-BAT-GENI-03R across India.

Technical Specifications

Input Voltage

28VDC External PSU

Input Current

7.0 A (max)

Charge Current

3.75 A (max/bay)

Recharge Time

2.75 hrs (typ)

Operating Temperature

1°C ~ 40°C (34°F ~ 104°F)

Storage Temperature

-10°C ~ 35°C (14°F ~ 95°F)

Charge Method

Smart (Multi Chemistry)

Compliance

Net Weight

2.05 kg

Shipping Weight

2.8 kg

Installation method

Wall Mount

What is RCC-BAT-GENI-03R?

The RCC-BAT-GENI-03R is a intelligent healthcare manufactured by Avalue, designed specifically for medical-cart-stand-arm-battery applications. It features storage of -10°C ~ 35°C (14°F ~ 95°F), operating temperature of 1°C ~ 40°C (34°F ~ 104°F) and certification of CE. The Avalue RCC-BAT-GENI-03R is a wall-mount smart bay charger from the RCC series, listed under Intelligent Healthcare in the Medical Cart, Stand, Arm and Battery group. It is powered from a 28VDC external PSU with a maximum input current of 7.0 A, and delivers up to 3.75 A per bay using a smart multi chemistry charge method, with a typical recharge time of 2.75 hours. It operates from 1°C to 40°C, carries CE compliance and weighs 2.05 kg net. It suits hospitals and clinics that need organised, dependable battery charging for mobile medical workstations and point of care equipment. TSL Automation Solutions supplies and supports the RCC-BAT-GENI-03R across India.

Key Features & Benefits

Smart multi chemistry charge method
28VDC external PSU input
Input current 7.0 A (max)
Charge current 3.75 A (max per bay)
Typical recharge time 2.75 hrs
Wall mount installation
Operating temperature 1°C to 40°C
CE compliance
Net weight 2.05 kg (shipping 2.8 kg)

Applications & Use Cases

The RCC-BAT-GENI-03R is ideal for various industrial automation applications:

DC-powered industrial installations and mobile applications
Extreme temperature environments and outdoor installations
Healthcare and medical device integration
Industrial automation and control
Manufacturing process monitoring
Quality assurance and inspection
Production line automation