What is the Avalue RCC-POP-03R?

The RCC-POP-03R is a Power On Pole from Avalue's RCC series. It is designed to supply battery power to medical carts, stands and arms, so that mounted computing or display equipment can run without a mains cable. It uses GeniTec power modules and can be retrofitted to existing equipment.

Which product category does the RCC-POP-03R belong to?

It is listed under Intelligent Healthcare, in the sub-category Medical Cart/Stand/Arm/Battery, and belongs to the RCC series. It is a power accessory for healthcare mobility setups rather than a computer, so it is normally selected together with a cart, stand or arm and the device that will be powered.

What input voltage does the RCC-POP-03R need?

The specification lists an input voltage of 28 VDC. This is the supply used to charge the power modules. Please confirm the matching charging source and any cabling with TSL Automation Solutions before ordering, so the pole is paired with the correct supply for your cart or stand.

What output voltage does the RCC-POP-03R provide?

The output voltage range is 12-28 VDC. This lets the pole power equipment designed for a DC input within that range. Check the input requirement of your device against this range and against the output power limit before selecting the pole for a particular cart or workstation.

How much power can the RCC-POP-03R deliver?

The maximum output power is 100 W at 12-18 VDC. If your device needs more than 100 W at those voltages, this pole is not the right fit on the stated figures. Share your device's power rating with TSL and we can help check suitability.

What is the maximum battery capacity?

The maximum power capacity is 432 Wh. This figure corresponds to a configuration with two power modules, each rated at 216 Wh. A single module gives half of that capacity, so choose the dock and module configuration according to how long your equipment needs to run between charges.

What are the power modules like?

The pole works with easily washable 216 Wh power modules rated IP67. The washable design supports the easy-cleaning approach needed in healthcare environments. The pole is described as power ready with Avalue's GeniTec power modules, so these are the modules to plan around when specifying the system.

What is the charge current?

The charge current is 4.0 A maximum. Together with the 28 VDC input, this governs how quickly the power modules recharge. Actual charging behaviour depends on the modules fitted and the supply used, so confirm your charging arrangement with TSL if you plan fast turnaround between shifts.

How long does it take to recharge?

The typical recharge time is 5.0 hours with two power modules fitted. This is a typical figure, not a guarantee, and real times can vary with conditions. Plan charging windows, such as between shifts or overnight, around this value when deciding how many modules and carts your ward needs.

What is the operating temperature range?

The operating temperature range is 1°C to 40°C (34°F to 104°F). This suits typical indoor hospital and clinic environments. It is not specified for outdoor or very cold locations, so if your site may fall outside this range, please discuss the application with TSL before purchase.

What is the storage temperature range?

The storage temperature range is -10°C to 35°C (14°F to 95°F). Note that the upper storage limit is lower than the upper operating limit, so avoid leaving the pole and modules in hot stores or vehicles. Keep them within this range when not in use.

Which certifications does the RCC-POP-03R carry?

The specification lists CE and UKCA compliance. No other certifications are stated in the specification we hold. If your hospital or tender requires additional documents or test reports, contact TSL Automation Solutions and we will ask Avalue for the relevant information.

Does it support single or dual dock systems?

Yes. Single or dual dock systems are listed as features. A dual dock holds two power modules, which matches the 432 Wh maximum capacity and the 5.0 hour typical recharge time quoted for two modules. A single dock suits lighter use where a smaller capacity is enough.

Can it be retrofitted to existing carts and stands?

Yes, retrofit to existing equipment is one of the listed features. This helps hospitals add battery power without replacing a whole fleet of carts. Mounting details depend on your existing equipment, so send TSL the cart or stand model and we can advise on fit with Avalue.

How is the RCC-POP-03R cleaned?

It is designed for easy cleaning, and the 216 Wh power modules are described as easily washable with an IP67 rating. Follow your hospital's infection control policy and Avalue's cleaning guidance for approved agents and methods, which TSL can help you obtain.

Is OEM customisation available?

Yes, OEM customisation for specific applications is listed as a feature. If you need a variation for a particular cart, workflow or brand, tell TSL Automation Solutions your requirements and we will take it up with Avalue. Lead times and minimum quantities for custom work are not stated in the specification.

What applications is it suited to?

It is intended for healthcare mobility, powering equipment on medical carts, stands and arms. Typical uses include point of care computing, electronic medical record access and patient monitoring displays. The stated output of up to 100 W at 12-18 VDC defines the kind of devices it can support.

Does the RCC-POP-03R include a computer, display or operating system?

No. The specification describes a power pole only, with input, output, capacity, charging and temperature data. No processor, memory, storage, display or operating system is listed. You would pair it with a compatible device, such as an Avalue medical panel PC, chosen separately.

What mounting options does it have?

The specification does not list specific mounting dimensions or brackets. It is described as a pole that can be retrofitted to existing equipment and used with medical carts, stands and arms. For mounting questions, share your cart or stand details with TSL and we will confirm with Avalue.

Is it lightweight and easy to maneuver?

Lightweight maneuverability and a sleek, easy-to-use design are listed features, which helps keep a mobile cart easy to move between rooms. The specification does not give a weight figure, so please ask TSL if you need the exact weight for cart load calculations.

How does the RCC-POP-03R compare with the RCC-MITCART-01R?

They serve different roles. The RCC-MITCART-01R is a medical IT cart with ergonomic, height-adjustable or fixed options, cable management and a small footprint. The RCC-POP-03R is a Power On Pole that supplies battery power and can be retrofitted to existing equipment. They can be considered together in one mobile workstation.

Which should I choose, the power pole or the IT cart?

Choose the RCC-POP-03R if you already have carts or stands and want to add battery power with 12-28 VDC output. Choose the RCC-MITCART-01R if you need the cart itself, with its ergonomic and height-adjustable design. Many projects need both, so tell TSL your setup for guidance.

Does TSL Automation Solutions supply and support the RCC-POP-03R in India?

Yes. TSL Automation Solutions is an authorised India distributor of Avalue products and supplies and supports the RCC-POP-03R. Contact us for quotations, availability, technical questions and warranty terms. Warranty duration is not stated in the specification, so we will confirm the applicable terms when you enquire.

Avalue · Intelligent Healthcare

RCC-POP-03R

Data Sheet

*Price on request. Contact us for a quote.

Manufacturer: Avalue

Highlights

Power On Pole for medical carts, stands and arms
28 VDC input, 12-28 VDC output
Up to 100 W output at 12-18 VDC
Up to 432 Wh capacity with two power modules
Easily washable 216 Wh power modules (IP67)
Single or dual dock systems
Retrofit to existing equipment
Power ready with GeniTec power modules
Easy cleaning, lightweight maneuverability
OEM customisation for specific applications

Product Description

The Avalue RCC-POP-03R is a Power On Pole for medical carts, stands and arms, part of the RCC series in the Intelligent Healthcare range.

It accepts a 28 VDC input and delivers 12-28 VDC output, with up to 100 W at 12-18 VDC and a maximum capacity of 432 Wh when fitted with two 216 Wh washable IP67 power modules. Single or dual dock systems are available, and the pole can be retrofitted to existing equipment.

Its lightweight, easy-to-clean design suits mobile workstations, patient monitoring and point of care computing in hospitals and clinics. It is CE and UKCA compliant. TSL Automation Solutions supplies and supports the RCC-POP-03R in India.

Technical Specifications

Input Voltage

28 VDC

Output Voltage

12-28 VDC

Output Power (max)

100 W @ 12-18 VDC

Power Capacity (max)

432 Wh max

Charge Current

4.0 A (max)

Recharge Time

5.0 hrs (typ) - Two power modules

Operating Temperature

1°C ~ 40°C (34°F ~ 104°F)

Storage Temperature

-10°C ~ 35°C (14°F ~ 95°F)

Compliance

CE, UKCA

What is RCC-POP-03R?

The RCC-POP-03R is a intelligent healthcare manufactured by Avalue, designed specifically for medical-cart-stand-arm-battery applications. It features storage of -10°C ~ 35°C (14°F ~ 95°F), operating temperature of 1°C ~ 40°C (34°F ~ 104°F) and certification of CE, UKCA. The Avalue RCC-POP-03R is a Power On Pole for medical carts, stands and arms, part of the RCC series in the Intelligent Healthcare range. It accepts a 28 VDC input and delivers 12-28 VDC output, with up to 100 W at 12-18 VDC and a maximum capacity of 432 Wh when fitted with two 216 Wh washable IP67 power modules. Single or dual dock systems are available, and the pole can be retrofitted to existing equipment. Its lightweight, easy-to-clean design suits mobile workstations, patient monitoring and point of care computing in hospitals and clinics. It is CE and UKCA compliant. TSL Automation Solutions supplies and supports the RCC-POP-03R in India.

Key Features & Benefits

Power On Pole for medical carts, stands and arms
28 VDC input, 12-28 VDC output
Up to 100 W output at 12-18 VDC
Up to 432 Wh capacity with two power modules
Easily washable 216 Wh power modules (IP67)
Single or dual dock systems
Retrofit to existing equipment
Power ready with GeniTec power modules
Easy cleaning, lightweight maneuverability
OEM customisation for specific applications

Applications & Use Cases

The RCC-POP-03R is ideal for various industrial automation applications:

Harsh industrial environments requiring dust and water protection
DC-powered industrial installations and mobile applications
Medical device integration and healthcare applications
Healthcare and medical device integration
Industrial automation and control
Manufacturing process monitoring
Quality assurance and inspection
Production line automation