Section 14.2.1 · Chapter 14: Operation Logging
Operation Message
This section describes how to define the operation messages for all languages. The following is an example of Operation Message dialog box.
The following table describes each property in the General page.
|
Property |
Description |
|---|---|
| Use the text of the first language for all other languages | Check this item so the object always shows the text of the first language as the operation message regardless of what the current language is. You need to enter the text of the first language in the following edit box. |
| Use Text From Text Database |
Check this item that you can select a text from the text
database. The following is an example that shows you how
to select and edit text from text database. |
Need PM Designer itself?
V4 for current PK, PT, ITV and PM panels, V2 for older models. Free, sent by email.
Source.Section 14.2.1 of the PM Designer Software User Manual, Edition 2.0, © Cermate Technologies Inc. (www.cermate.com, service@cermate.com). Reproduced online, with the manual's own figures, by TSL Automation Solutions, authorised Cermate distributor, for users of Cermate HMI panels. PM Designer and PanelMaster are trademarks of Cermate Technologies Inc.
Text and figures are the manufacturer's and may describe features your panel or software version does not have. For a plain-language introduction read the PM Designer guide; for help with a specific panel contact TSL Automation.