TSL Automation Solutions Logo
Chapter 1: Introduction: 28 topics
  1. 1.1Project Development Steps
  2. Using the software
  3. 1.2.1Main Menus
  4. 1.2.1.1File Menu
  5. 1.2.1.2Edit Menu
  6. 1.2.1.3View Menu
  7. 1.2.1.4Screen Menu
  8. 1.2.1.5Draw Menu
  9. 1.2.1.6Object Menu
  10. 1.2.1.7Project Menu
  11. 1.2.1.8Panel Menu
  12. 1.2.1.9Tools Menu
  13. 1.2.1.10Window Menu
  14. 1.2.1.11Help Sub-menu
  15. Toolbars
  16. 1.2.2.1Standard Toolbar
  17. 1.2.2.2Object Toolbar
  18. 1.2.2.3Draw Toolbar
  19. 1.2.2.4Text Toolbar
  20. 1.2.2.5Edit Toolbar
  21. 1.2.2.6Address Toolbar
  22. 1.2.2.7Picture Toolbar
  23. 1.2.2.8Status Bar
  24. 1.2.3Project Manager
  25. 1.2.4Screen Manager
  26. Pop-up Menus
  27. 1.2.5.1Object Pop-up Menu
  28. 1.2.5.2Screen Pop-up Menu
All 20 chapters →

Section 1.2.2.5 · Chapter 1: Introduction

Edit Toolbar

Icon

Tool Tip

 Description
Left Align the left sides of selected objects to the left side of the reference object. All the objects move horizontally so their left sides are in line with the left side of the reference object.
Vertical Center Align the vertical centers of selected objects to the vertical center of the reference object. All the objects move horizontally so their vertical centers are in line with the vertical center of the reference object.
Right Align the right sides of selected objects to the right side of the reference object. All the objects move horizontally so their right sides are in line with the right side of the reference object.
Top Align the tops of the selected objects to the top of the reference object. All the objects move vertically so their tops are in line with the top of the reference object.
Horizontal Center Align the horizontal centers of selected objects to the horizontal center of the reference object. All the objects move vertically so their horizontal centers are in line with the horizontal center of the reference object.
Bottom Align the bottoms of selected objects to the bottom of the reference object. All the objects move vertically so their bottoms are in line with the bottom of the reference object.
To Grid Select or deselect the option of aligning objects to the grid points.
Make Same Width Make the selected objects have the same width as the reference object.
Make Same Height Make the selected objects have the same height as the reference object.
Make Same Size Make the selected objects have the same width and height as the reference object.
Nudge Left Nudge the selection left. When the Snap to Grid option is not selected, all objects of the selection move one pixel left. When the Snap to Grid option is selected, each object of the selection moves left to where its upper-left corner aligns to the nearest grid point.
Nudge Right Nudge the selection right. When the Snap to Grid option is not selected, all objects of the selection move one pixel right. When the Snap to Grid option is selected, each object of the selection moves right to where its upper-left corner aligns to the nearest grid point.
Nudge Up Nudge the selection up. When the Snap to Grid option is not selected, all objects of the selection move one pixel up. When the Snap to Grid option is selected, each object of the selection moves up to where its upper-left corner aligns to the nearest grid point.
Nudge Down Nudge the selection down. When the Snap to Grid option is not selected, all objects of the selection move one pixel down. When the Snap to Grid option is selected, each object of the selection moves down to where its upper-left corner aligns to the nearest grid point.
Bring to Top Bring the selection to the top.
Bring Forward Bring the selected object one layer up.
Send Backward Send the selected object one layer down.
Send to Bottom Send the selection to the bottom.
Group Group the selection.
Ungroup Ungroup the selected group.
Pin Pin the selection, so it cannot be moved.
Unpin Unpin the selection, so it can be moved again.
Auto Text Resizing Select or deselect the option of automatic text resizing.

Need PM Designer itself?

V4 for current PK, PT, ITV and PM panels, V2 for older models. Free, sent by email.

Download PM DesignerAsk about a panel

Source.Section 1.2.2.5 of the PM Designer Software User Manual, Edition 2.0, © Cermate Technologies Inc. (www.cermate.com, service@cermate.com). Reproduced online, with the manual's own figures, by TSL Automation Solutions, authorised Cermate distributor, for users of Cermate HMI panels. PM Designer and PanelMaster are trademarks of Cermate Technologies Inc.

Text and figures are the manufacturer's and may describe features your panel or software version does not have. For a plain-language introduction read the PM Designer guide; for help with a specific panel contact TSL Automation.