TSL Automation Solutions Logo
Chapter 15: Using Macros: 35 topics
  1. 15.1Types of Macros
  2. Working with Macros
  3. 15.2.1Creating Macros
  4. 15.2.2Opening and Closing Macros
  5. 15.2.3Naming and Finding a Macro
  6. 15.2.4Deleting a macro
  7. 15.2.5Saving and Exporting Macros
  8. 15.2.6Macro Settings in the Dialog
  9. 15.3Writing Native Scripts
  10. 15.3.1Native Script Editor Window
  11. 15.3.2Native Script Command Properties Tool Window
  12. Native Script Commands and Examples
  13. 15.4.1Native Script Notations and Terminology
  14. 15.4.2Data Transfer
  15. 15.4.3Arithmetic Operation
  16. 15.4.4Logical Operation
  17. 15.4.5Calculation
  18. 15.4.6Data Conversion
  19. 15.4.7Conditional Operation
  20. 15.4.8Program Control
  21. 15.4.9Timer Operation
  22. 15.4.10Keypad Operation
  23. 15.4.11Recipe Operation
  24. 15.4.12Data Logger Operation
  25. 15.4.13Communication Operation
  26. 15.4.14System Service
  27. 15.4.14.1Calculating Relative Humidity
  28. 15.4.15Screen Operation
  29. 15.4.16File Operation
  30. 15.4.17Comparison
  31. 15.4.18Print Operation
  32. 15.4.19Sound Operation
  33. 15.4.20String Operation
  34. 15.4.21Math Operation
  35. 15.4.22Run Operation
All 20 chapters →

Section 15.4.10 · Chapter 15: Using Macros

Keypad Operation

■ KB_MCR

Format KB_MCR(P1) Data Type U
Function Accepts or ignores the character/command currently input by the associated keypad button. This command must be used only in a macro that is run by a keypad button. A keypad button runs the specified macro when it is pressed. You can use this command in a keypad button macro to accept or ignore the current input of that button.
P1 (I/C) The value or the location that holds the value to determine the acceptance of the keypad button input. If the value is 0, the input will be accepted; Otherwise the input will be ignored.
Example 1 KB_MCR(1) /* Ignore the current input */

■ KPD_TEXT

Format KPD_TEXT(P1) Data Type U
Function Initialized the keypad display and buffer using the string P1.
P1 (I) The memory block (or byte array) that contains the null-terminated ASCII character string to be used to initialize the keypad display and buffer.
Example 1 $U100 = "initial text"
KPD_TEXT($U100) /* Initialize the keypad display and buffer using the string "initial text". */

Need PM Designer itself?

V4 for current PK, PT, ITV and PM panels, V2 for older models. Free, sent by email.

Download PM DesignerAsk about a panel

Source.Section 15.4.10 of the PM Designer Software User Manual, Edition 2.0, © Cermate Technologies Inc. (www.cermate.com, service@cermate.com). Reproduced online, with the manual's own figures, by TSL Automation Solutions, authorised Cermate distributor, for users of Cermate HMI panels. PM Designer and PanelMaster are trademarks of Cermate Technologies Inc.

Text and figures are the manufacturer's and may describe features your panel or software version does not have. For a plain-language introduction read the PM Designer guide; for help with a specific panel contact TSL Automation.