TSL Automation Solutions Logo
Chapter 11: Recipes and Recipes Objects: 22 topics
  1. 11.1Recipes
  2. 11.2Recipe Data Flow and Memory Allocation
  3. 11.3Working with Recipes
  4. Transferring Recipes
  5. 11.4.1Transferring Recipes between the PC and HMI
  6. 11.4.2Transferring Recipes between the HMI and USB Memory Stick/Micro SD Card
  7. 11.4.3Transferring Recipes between the battery backed memory and flash ROM
  8. 11.4.4Transferring Recipes between the HMI and PLC/Controller
  9. 11.5Setting up Recipe Blocks
  10. 11.5.1Recipe Block - General Settings
  11. 11.5.2Recipe Block - Data Item Settings
  12. Selecting a Recipe Using Recipe Selectors
  13. 11.6.1Recipe Selector - Basic Operations
  14. 11.6.2Recipe Selector - Operation Options
  15. 11.6.3Recipe Selector - Settings
  16. 11.6.4Recipe Selector - General Settings
  17. Displaying and Modifying Recipe Data Using Recipe Tables
  18. 11.7.1Recipe Table - Basic Operations
  19. 11.7.2Recipe Table - Operation Options
  20. 11.7.3Recipe Table - Settings
  21. 11.7.4Recipe Table - General Settings
  22. 11.7.5Recipe Table - Data Item Settings
All 20 chapters →

Section 11.6.2 · Chapter 11: Recipes and Recipes Objects

Recipe Selector - Operation Options

The following operation options can be added to a recipe selector. Select and set up the options in the recipe selector property sheet.

Options

 Description
Touch Operation Control The touch operation can be enabled or disabled either by a specified bit or by the current user level. Select and set this option in the Advanced page.
Operation Logging Each change to the specified variable can be recorded in the operation log. Select and set this option in the Advanced page.
Visibility Control You can show or hide a recipe selector by a specified bit or the current user level. Select and set up this option in the Visibility page.

Need PM Designer itself?

V4 for current PK, PT, ITV and PM panels, V2 for older models. Free, sent by email.

Download PM DesignerAsk about a panel

Source.Section 11.6.2 of the PM Designer Software User Manual, Edition 2.0, © Cermate Technologies Inc. (www.cermate.com, service@cermate.com). Reproduced online, with the manual's own figures, by TSL Automation Solutions, authorised Cermate distributor, for users of Cermate HMI panels. PM Designer and PanelMaster are trademarks of Cermate Technologies Inc.

Text and figures are the manufacturer's and may describe features your panel or software version does not have. For a plain-language introduction read the PM Designer guide; for help with a specific panel contact TSL Automation.