Section 12.3.1 · Chapter 12: Alarms and Alarm Displays
Creating an Alarm Block
To create a discrete alarm block, you may do one of the following:
- In the Project Manager tool window, right-click the Alarms node (
) of the
concerned panel application and select Add Discrete Alarm Block. - In the menu bar, click Panel to bring up the Panel sub-menu. Click Discrete Alarm Block in the Panel sub-menu to bring up the pop-up menu. Select Add in the pop-up menu.
To create an analog alarm block, you may do one of the following:
- In the Project Manager tool window, right-click the Alarms node (
) of the
concerned panel application and select Add Analog Alarm Block.
- In the menu bar, click Panel to bring up the Panel sub-menu. Click Analog Alarm Block in the Panel sub-menu to bring up the pop-up menu. Select Add in the pop-up menu.
Need PM Designer itself?
V4 for current PK, PT, ITV and PM panels, V2 for older models. Free, sent by email.
Source.Section 12.3.1 of the PM Designer Software User Manual, Edition 2.0, © Cermate Technologies Inc. (www.cermate.com, service@cermate.com). Reproduced online, with the manual's own figures, by TSL Automation Solutions, authorised Cermate distributor, for users of Cermate HMI panels. PM Designer and PanelMaster are trademarks of Cermate Technologies Inc.
Text and figures are the manufacturer's and may describe features your panel or software version does not have. For a plain-language introduction read the PM Designer guide; for help with a specific panel contact TSL Automation.