Name: TSL Automation Solutions
Address: OPP GTB NAGAR RAILWAY STATION, FLOOR-GRD, SHOP NO. 2-7, PLOT- 226/227,2, LAXMAN NIWAS, RAMMILAN G SHUKLA MARG, Mumbai, Maharashtra, 400022, IN

The following operation options can be selected for a screen button to make it more informative, secure, and useful. You need to select and set these options in the Screen Button property sheet.

Options	Description
Change User Level	The button can be configured to change the current user level when it is activated to perform the function.
Acknowledge Alarm	The button can be configured to acknowledge the associated alarm on the screen where it is located. You can configure an alarm to display an (alarm) screen. The alarm is then the screen’s associated alarm.
Indicate Screen Already Opened	The button can be configured to indicate that a specified screen is opened. The indication is done by exchanging the button’s FG color with its text color.
Macro	You can specify a macro that will run when the screen button is activated to perform its operation. Select this option in the General page. Specify and edit the macro in the Macro page. Note: The screen switching operation will not be performed until the macro is completely executed. Therefore, it is important to keep the macro as short as possible so as not to delay the operation.
Touch Operation Control	The touch operation can be enabled or disabled either by a specified bit or by the current user level. Select and set this option in the Advanced page.
Minimum Hold Time	The touch operation of the button will not be activated until the button is pressed and held down for the specified time period (Minimum Hold Time). Select and set this option in the Advanced page.
Notification	The screen button can be configured to notify a bit of the completion of the screen switching operation. Select and set this option in the Advanced page.
Operation Logging	Each touch operation of the button can be recorded in the operation log. Select and set this option in the Advanced page.
Invisible	The button can be invisible and still touch operable. Select this option in the Visibility page.
Visibility Control	The button can be shown or hidden either by a specified bit or by the current user level. Select and set this option in the Visibility page.