Name: TSL Automation Solutions
Address: OPP GTB NAGAR RAILWAY STATION, FLOOR-GRD, SHOP NO. 2-7, PLOT- 226/227,2, LAXMAN NIWAS, RAMMILAN G SHUKLA MARG, Mumbai, Maharashtra, 400022, IN

This section describes how to define the advanced settings for character entries. The following is an example of the Advanced page.

The following table describes each property in the Advanced page.

		Signal	Description
Property		Description
Touch Operation Control	Enabled by Bit	Check this option so the touch operation of the Character entry will be enabled and disabled by the specified bit.
	Control Bit	Specifies the bit that enables and disables the touch operation. Click to enter a bit address. Click to select a bit tag.
	Enabling State	Specifies the state (On or Off) that enables the touch operation.
	Enabled by User Level	Check this item so the touch operation of the Character entry will be enabled and disabled by the current user level.
	Lowest Enabling User Level	Specifies the lowest user level that is required to enable the touch operation.
	Show Disabled Sign	Check this option for the touch operation disabled sign to be displayed on the Character entry when the touch operation is disabled.
Timeout	Timeout	Check this option so data entry will be cancelled if the numeric keypad does not receive any input within the specified time.
Timeout	Timeout Time	Specifies the maximum time that the numeric keypad will wait to receive a new input. If there is no input within the specified time, the Character keypad will be closed and data entry will be cancelled.
Notification	Notification	Check this option so the Character entry will notify the specified bit after it finishes outputting the entered value to the destination variable.
	Signal	Select one of the following signals for the notification:
		Level	Set the specified bit to the specified state.
		Pulse	Send a positive pulse to the specified bit.
	Bit	Specifies the bit that receives the notification.
	State	Specifies the state (On or Off) that is used for the notification.
Operator Confirmation	Operator Confirmation	Check this option if you want the operator to confirm what he/she enters into the numeric entry. The Confirmation box will be displayed when a value is entered into the Character entry. If the operator selects “Yes” in the Confirmation box, the numeric entry will write the entered value to the specified variable. If the operator selects “No” or the operator does not respond within the specified time period (Maximum Waiting Time), the Character entry will cancel the data entry operation.
Operator Confirmation	Maximum Waiting Time	Specifies the maximum time that the Character entry will wait for the operator’s confirmation. Data entry will be cancelled if the operator does not respond within this time.
Change User Level	Change User Level	Check this option if you want to change the current user level after the operation is performed.
Change User Level	New User Level	Set the new current user level.
Operation Logging	Operation Logging	Check this option so the following three items will be recorded in the operation log when the Character entry outputs the entered value. There are three recorded items: 1) The time when the operation is performed 2) The entered Character 3) The predefined operation message
	Message	Enter the operation message of the first language here.
		Click this button to bring up the Operation Message dialog box so that you can edit the operation message for all the languages.
Designated Keypad	Designated Keypad	Check this option if you want the character entry to have an independent keypad other than the system keypad or the customized keypad used for whole panel application.
Designated Keypad	Screen	Select a window screen as the keypad.