TSL Automation Solutions Logo
Chapter 7: Displaying and Inputting Data: 32 topics
  1. 7.1Numeric Entries
  2. 7.1.1Numeric Entry - Operation Options
  3. 7.1.2Numeric Entry - Settings
  4. 7.1.3Numeric Entry - General Settings
  5. 7.1.4Advanced Settings for Numeric Entries
  6. 7.2Numeric Displays
  7. 7.2.1Numeric Display - Operation Options
  8. 7.2.2Numeric Display - Settings
  9. 7.2.3Numeric Display - General Settings
  10. 7.2.4Numeric Display - Advanced Settings
  11. Advanced Numeric Displays
  12. 7.3.1Advanced Numeric Displays
  13. 7.3.2Advanced Numeric Display - Operation Options
  14. 7.3.3Advanced Numeric Display - Settings
  15. 7.3.4Advanced Numeric Display - General Settings
  16. 7.3.5Advanced Numeric Display - Range Settings
  17. 7.4Character Entries
  18. 7.4.1Character Entry - Operation Options
  19. 7.4.2Character Entry - Settings
  20. 7.4.3Character Entry - General Settings
  21. 7.4.4Character Entry - Advanced Settings
  22. 7.5Character Displays
  23. 7.5.1Character Display - Operation Options
  24. 7.5.2Character Display - Settings
  25. 7.5.3Character Display - General Settings
  26. 7.6Time Displays
  27. 7.6.1Time Display - Settings
  28. 7.7Date Displays
  29. 7.7.1Date Display - Settings
  30. 7.8Day-of-week Displays
  31. 7.8.1Day-of-week Display - Settings
  32. 7.8.2Day-of-week Display - General Settings
All 20 chapters →

Section 7.4 · Chapter 7: Displaying and Inputting Data

Character Entries

You can enter an ASCII or Western European or Cyrillic or simplified Chinese string for a variable using a character entry. If the target panel is the HMI Runtime, you can also use this object to enter a Unicode string. For the applications that the operator needs to switch between the ASCII character keypad and the Pinyin keypad, the HMI unit can memorize the type of keypad that was used the last time and display the same type of keypad for the next character entry.

You can complete all the settings of a character entry in the Character Entry property sheet. This sheet contains the following four pages. Some of the pages appear only when they are needed.

■ General
Described in Section 7.4.3.

■ Advanced
Described in Section 7.4.4.

■ Visibility
Described in Section 4.4.6.

■ External Label
Described in Section 4.3.8.

In this section

  1. 7.4.1Character Entry - Operation Options
  2. 7.4.2Character Entry - Settings
  3. 7.4.3Character Entry - General Settings
  4. 7.4.4Character Entry - Advanced Settings

Need PM Designer itself?

V4 for current PK, PT, ITV and PM panels, V2 for older models. Free, sent by email.

Download PM DesignerAsk about a panel

Source.Section 7.4 of the PM Designer Software User Manual, Edition 2.0, © Cermate Technologies Inc. (www.cermate.com, service@cermate.com). Reproduced online, with the manual's own figures, by TSL Automation Solutions, authorised Cermate distributor, for users of Cermate HMI panels. PM Designer and PanelMaster are trademarks of Cermate Technologies Inc.

Text and figures are the manufacturer's and may describe features your panel or software version does not have. For a plain-language introduction read the PM Designer guide; for help with a specific panel contact TSL Automation.