TSL Automation Solutions Logo
Chapter 9: Animated Objects: 44 topics
  1. Pipelines
  2. 9.1.1Pipeline - Basic Operations
  3. 9.1.2Pipeline - Operation Options
  4. 9.1.3Pipeline - Settings
  5. 9.1.4Pipeline - General Settings
  6. 9.1.5Pipeline - Pipe Settings
  7. 9.8Dynamic Lines
  8. 9.8.1Dynamic Lines - Operation Options
  9. 9.8.2Dynamic Lines - Settings
  10. 9.8.3Dynamic Lines - General Settings
  11. 9.2Dynamic Circles
  12. 9.2.1Dynamic Circle - Operation Options
  13. 9.2.2Dynamic Circle - Settings
  14. 9.2.3Dynamic Circle - General Settings
  15. Specifying Colors for Dynamic Rectangles and Circles
  16. 9.2.4.164K-color Models
  17. 9.2.4.2256-color Models
  18. 9.3Dynamic Rectangles
  19. 9.3.1Dynamic Rectangle - Operation Options
  20. 9.3.2Dynamic Rectangle - Settings
  21. 9.3.3Dynamic Rectangle - General Settings
  22. 9.4GIF Displays
  23. 9.4.1GIF Display - Operation Options
  24. 9.4.2GIF Display - Settings
  25. 9.4.3GIF Display - General Settings
  26. Picture Displays
  27. 9.5.1Picture Display - Basic Operations
  28. 9.5.2Picture Display - Operation Options
  29. 9.5.3Picture Display - Settings
  30. 9.5.4Picture Display - General Settings
  31. 9.6Animated Graphics
  32. 9.6.1Animated Graphic - Operation Options
  33. 9.6.2Animated Graphic - Settings
  34. 9.6.3Animated Graphic - General Settings
  35. 9.6.3.1Using Object Group for Animated Graphics
  36. 9.6.4Animated Graphic - GIF Settings
  37. 9.6.5Animated Graphic - Path Settings
  38. 9.7Path Display
  39. 9.7.1Path Display - Operation Options
  40. 9.7.2Path Display - Settings
  41. 9.7.3Path Display - General Settings
  42. 9.7.3.1Path Display - Definitions of Path Elements
  43. 9.7.3.2Path Display - Color Values
  44. 9.7.4Path Display for Rebar Bending Machine
All 20 chapters →

Section 9.1.5 · Chapter 9: Animated Objects

Pipeline - Pipe Settings

This section describes how to define the pipes for the pipelines. The following is an example of the Pipe page.

The following table describes each property in the Pipe page.

Property

 Description
Pipe Type Specifies the type of the selected pipe.
X1 The horizontal coordinate of the upper-left corner of the selected pipe.
Y1 The vertical coordinate of the upper-left corner of the selected pipe.
X2 The horizontal coordinate of the lower-right corner of the selected pipe.
Y2 The vertical coordinate of the lower-right corner of the selected pipe.
Flow Effect <Check Box> Select this option if you want the selected pipe to show the flow effect.
Symbol Select a symbol for the flow effect.
Color Select a color for the flow symbol
Length Ratio(%) Specifies the length ratio between pipe and flow effect.

Need PM Designer itself?

V4 for current PK, PT, ITV and PM panels, V2 for older models. Free, sent by email.

Download PM DesignerAsk about a panel

Source.Section 9.1.5 of the PM Designer Software User Manual, Edition 2.0, © Cermate Technologies Inc. (www.cermate.com, service@cermate.com). Reproduced online, with the manual's own figures, by TSL Automation Solutions, authorised Cermate distributor, for users of Cermate HMI panels. PM Designer and PanelMaster are trademarks of Cermate Technologies Inc.

Text and figures are the manufacturer's and may describe features your panel or software version does not have. For a plain-language introduction read the PM Designer guide; for help with a specific panel contact TSL Automation.