Section 8.2.5 · Chapter 8: Graphs and Charts
Meter - Range Settings
This section describes how to define the range settings for a meter. The following is an example of the Range page of the Meter property sheet.
The following table describes each property in the Range page.
|
Property |
Description |
|---|---|
| Range Display | Check this option if you want the meter to display the range marks along its swing path. |
| Variable Range | Check this option so the low limit and high limit for the range marks will be specified at runtime by the designated variables. |
| Low Limit |
Specifies the low limit of the low range mark when
Variable Range is not selected. When Variable Range is selected, this property specifies the variable whose value is the low limit of the low range mark at runtime. Click 
to enter an address for this field. Click
to select a tag for this field. |
| High Limit |
Specifies the high limit of the high range mark when
Variable Range is not selected. When Variable Range is selected, this property specifies the variable whose value is the high limit of the high range mark at runtime. Click
to enter an address for this field. Click
to select a tag for this field. |
| Low Color | The color of the low range mark. |
| High Color | The color of the high range mark. |
Need PM Designer itself?
V4 for current PK, PT, ITV and PM panels, V2 for older models. Free, sent by email.
Source.Section 8.2.5 of the PM Designer Software User Manual, Edition 2.0, © Cermate Technologies Inc. (www.cermate.com, service@cermate.com). Reproduced online, with the manual's own figures, by TSL Automation Solutions, authorised Cermate distributor, for users of Cermate HMI panels. PM Designer and PanelMaster are trademarks of Cermate Technologies Inc.
Text and figures are the manufacturer's and may describe features your panel or software version does not have. For a plain-language introduction read the PM Designer guide; for help with a specific panel contact TSL Automation.