Section 4.3.2 · Chapter 4: Designing Screens
Selecting a Pattern
■ Pattern Icons
In a dialog box, a Pattern icon is associated with a property that requires a
pattern. It shows the pattern of the current selection and you can click it to
bring up the Pattern palette. With the Pattern palette, you can select a pattern
for the associated property. The following is a Pattern icon showing that the
current selection is the “big dashes”.
■ Pattern Palette
With the Pattern palette, you can select a pattern from a set of predefined
patterns. Usually, you click a Pattern icon to bring up the Pattern palette as
shown below.
The “big dashes” block is outlined to indicate that it is the current selection.
To select a pattern, click on that pattern block. To cancel the operation, click
on any position other than the pattern blocks.
Need PM Designer itself?
V4 for current PK, PT, ITV and PM panels, V2 for older models. Free, sent by email.
Source.Section 4.3.2 of the PM Designer Software User Manual, Edition 2.0, © Cermate Technologies Inc. (www.cermate.com, service@cermate.com). Reproduced online, with the manual's own figures, by TSL Automation Solutions, authorised Cermate distributor, for users of Cermate HMI panels. PM Designer and PanelMaster are trademarks of Cermate Technologies Inc.
Text and figures are the manufacturer's and may describe features your panel or software version does not have. For a plain-language introduction read the PM Designer guide; for help with a specific panel contact TSL Automation.